Ricoh 3260 7.Configuring/Registering Scan Settings, Note, ❖Scan Type, A Press [Scan Settings]

7.Configuring/Registering Scan Settings

This section describes how to specify scan settings and how to configure settings according to the orientation of the original. In addition, this section describes the programming function by which you can register frequently used settings.

Specifying Scan Settings

A Press [Scan Settings].

B Select items such as resolution and original size, and then change their settings.

Specify the basic scan settings (scan type, resolution, image den- sity, scan size, and edit) as follows:

❖Scan Type

Originals are scanned according to the selected scan type.

Select the scan type from the fol- lowing:

•Auto Color Select

The color of original is auto- matically detected, and then the original is scanned.

Note

❒File Format Converter (op- tional) is required to use this function.

❒Depending on scan set- tings and/or content of your original, this scan type may not function cor-

rectly.

For black and white or scale scans, select from the following types:

•Text (Print)

For standard originals con- taining mainly text. Printer printing is best scanned with Text (Print).

•Text (OCR)

For standard originals con- taining mainly text.

Text (OCR) is suitable for higher OCR accuracy.

•Dropout Color

If the original includes colors you do not want to scan, you can select the colors to exclude. You can select red, green, blue, or other chromatic colors. If you specify narrow ranges for the selected colors, only the selected colors and colors very close to them are excluded. If you speci- fy wide ranges for the se-

lected colors, the selected
colors and all colors based
on them are excluded.	73