Sending Scan Files by Scan to Folder

Note

P Press [Connection Test].

 

For details about the maxi- mum number of characters that can be entered, see p.118 “Scan to Folder”.

The following is an example of a path where the folder name is “user” and the sub- folder name is “lib”: user\lib

3

H Press [OK].
I If entering a user name to log
on is required, press [Manual Input ] on the right side of the user name field.

The soft keyboard appears.

J Enter the user name.

Reference

For details about the maximum number of characters that can be entered, see p.118 “Scan to Folder”.

KPress [OK].

LIf entering a password to log on is required, press [Manual In- put] for [Password].

The soft keyboard appears.

MEnter the password.

NPress [OK].

OTo change the port number which is set in [System Settings], press [Change] on the right side of the port number field. Enter a port number using the number keys, and then press the {#}key.

A connection test is performed to check whether the specified shared folder exists.

Note

The connection test may take time.

You may not be able to press

[Connection Test] right after pressing [Cancel] during a connection test.

Q Check the connection test re- sult, and then press [Exit].RPress [OK].STo enter more destinations, re- peat steps A to R.

Note

To deselect a destination, press [UPrev.] or [TNext] to display the destination in the desti- nation field, and then press the {Clear/Stop} key.

To change the path for the folder that has been entered, press [Change] on the left side of the destination field. Enter the correct path for the fold- er, and then press [OK].

To check the selected desti- nations, press the {Check Modes} key.

36