Sending Scan Files by Scan to Folder

C Make the scan settings.

Note

There are two ways to specify scan settings, as described be- low:

Configure each setting for scanning. For details, see p.73 “Specifying Scan Set- tings”.

3

• Recall registered settings. For

 

details, see p.82 “Programs”.

D Select the destination.

E Specify the sender, subject, and message when sending e-mail is performed at the same time.

F Press [Store File].

I Press [OK].

J Press the {Start} key.

G Make sure that [Send & Store] is se- lected.

H Specify file information if neces- sary.

Reference

For details about specifying file information, see p.45 “Specifying file information”.

40