Ricoh 4506 operating instructions Selecting Modes for Designated Areas, 130

Area Editing (Option)

Selecting Modes for Designated Areas

Reference

The available modes for area editing depend on the area shape. ⇒ P.146 “Combination Chart for Area Editing”.

Regarding functions that cannot be used together in area editing, ⇒ P.146 “Combination Chart for Area Editing”.

More than one mode can be set for designated area, however, there are some limitations, ⇒ P.146 “Combination Chart for Area Editing”. And up to 7 patterns of modes can be set together.

Note

4	❒ Up to 20 groups of multiple areas can be edited. All the areas should belong
	to groups 1 ∼ 20. You can select up to seven job patterns for at most 20 groups.
	After you have set seven patterns, the copier will only allow you to choose the
	pattern of a previous group. If you change the settings for one group, it will
	change the settings for all other groups with the same job pattern. However,
	if you have set a Paint, Color Background, or Frame/ Line, changing the color
	in one group will not affect other groups. (Up to 15 colors can be selected.)
	❒ The modes that can be set for inside areas as follows:
	• Color/Image Adjustment: Image Density, Color Mode, Original Type, Im-
	age Adjustment, Color Adjustment, Color Balance Adjustment
	• Color Creation: Color Conversion, Color Erase, Color Background, Paint,
	Type Mask

Note

❒The editing functions available when specifying area with Frame/Line mode are Width and Color.

❒Color/Image Adjustment's default setting:

•Image Density - Manual Image Density

•Color Mode - Black & White

•Original Type - Text

❒You can change the default settings. ⇒ P.173 “User Tools”.

❒Depending on the shapes of the areas, coloring or deleting near the outlines of the areas might not do well, or the outlines might become uneven.

❒The way to set modes is basically the same as for the entire image. For details, refer to each page.

•To fill an area with a selected color, select the Paint.

•Image Density (⇒ P.26 “Adjusting Copy Image Density”.)

•Original Type (⇒ P.33 “Selecting the Original Image Type”.)

•Color Adjustment (⇒ P.106 “Color Adjustment”.)

•Color Conversion (⇒ P.83 “Color Conversion”.)

130