Power Connection, 189 | Ricoh 4506 instruction

Where to Put Your Machine

Power Connection

RWARNING:

•Only connect the machine to the power source described on the inside front cover of this manual. Connect the power cord directly into a wall outlet and do not use an extension cord.

•Do not damage, break or make any modifications to the power cord. Do not place heavy objects on it. Do not pull it hard nor bend it more than necessary. These actions could cause an electric shock or fire.

RCAUTION:

•Unplug the power cord from the wall outlet before you move the equipment. While moving the equipment, you should take care that the power cord will not be damaged under the equipment.

RCAUTION:

•When you disconnect the power plug from the wall outlet, always pull the plug (not the cable).

•When the main power switch is in the Stand-by position, the optional anti- condensation heaters are on. In case of emergency, unplug the machine's power cord.

	• When you unplug the power cord, the anti-condensation heaters turn off.
		7
	• Make sure the plug is firmly inserted in the outlet.	7
	• Make sure the plug is firmly inserted in the outlet.
	• Voltage must not fluctuate than 10%
	• The socket-outlet shall be installed near the equipment and shall be easily ac-
	cessible.

189

Image 201

Ricoh 4506 operating instructions Power Connection, 189

Contents

4506 Overseas Affiliates ⇒ P.189 Power Connection Means Power ON. c means Stand by Page Safety During Operation Safety Information Iii Symbols How to Read This ManualPreparation Limitation Table of Contents 106 103108 111 118 117119 130 173 169187 188Page What You Can Do with This Machine Page Guide To Components Main power switch Right side cover/Lower right cov Options Operation Panel Using the Touch Panel Display Selecting FunctionsManual Auto Paper Select key Entering Numbers Checking the Functions You Have SelectedCheck Modes key Color Sample Chart Turning on the Main Power Turning On the PowerPower Switches Operation switch right side of the operation panel When the machine is set for user codes When the Energy Saver indicator is litStarting the Machine Shutting down the machine Turning off the main power When you set originals in the document feeder When you set originals on the exposure glassOriginals Recommended Originals Originals Setting Originals on the Exposure Glass Setting a Stack of Originals Document Feeder Basics Setting one Original at a Time Document Feeder Basics Setting Originals of Different Sizes in the Document Feeder Press the Custom Size Orig. key Setting Custom Sized Originals Setting Custom Sized Originals Removing the Platen Cover to Copy a Large Original Copying Basic Procedure Adjusting Copy Image Density Auto image densityPress the Auto Image Density key Combined auto and manual image density Manual image density Auto color select mode Selecting a Color ModeFull color copy mode Press the Auto Color Select key Black & White copy mode Single color modePress the Black & White key Press the Single Color key Press the User Color 10 key Press the Single Color key Twin color mode Color CopyRed & Black Twin Color Red & Black Copy Twin Color Color Copy Selecting the Original Image Type Auto Text/Photo modePress Print Glossy Photo Photo mode Text mode Press the Special Original key Special original mode Selecting the Copy Paper Size Auto paper selectManual paper select Image Rotation Copying from the Bypass Tray 11, 51/2 ⋅ 81/2 Copying onto standard size paper with the bypass tray Press the Normal, Thick or OHP key Horizontal size Vertical size Extender Paper guides Copying onto custom size paper with the bypass tray Select Custom 1, Custom 2, Custom 3 or Enter Size keys Basic Procedure Making A3, 11 ⋅ 17 full bleed copies Make sure that the paper guides match the paper size ABC Copying onto the reverse side of paper Open the bypass tray Insert the paper into the bypass tray Press the Auto Reduce/Enlarge key Auto Reduce/Enlarge Auto Off Mode Energy Saver Mode Interrupt copying Storing your settings Auto StartProgram Recalling your settings Check Modes Counter Preset R/E Press the Reduce/Enlarge key Reducing Enlarging Zoom Using the and + keys Using the number keys Press the Reduce/Enlarge key Press the Directional Mag. key Directional Magnification % Directional Size Magnification mm Basic Procedure Copying Sided → 2 Sided Duplex-Making 2 Sided Copies Press the Duplex/Combine key Press the 1 Sided→2 Sided key Press the Duplex/Combine key Press the 2 Sided→2 Sided key Book → 2 Sided Multi → 2 Sided Original Book → 1 Sided Series Copies Series Copies Sided → 1 Sided Setting originals Originals set in the document feeder CombineCombine 2 Originals Press the Duplex/Combine key Combine 4 Originals Shift Shifting the Image Margin Adjustment Press the Margin Adjustment key When you use front cover mode with 1 Sided → 1 Sided mode Cover SheetFront Cover Back Cover Copy Front and Back Cover Press the Front&Back Cover key Back Cover Blank Copying Color Creation Color ConversionPress the Color Creation key Press the Color Conversion key Color Erase Color Background Press the Color Background key Image Creation MirrorPress the Image Creation key Press the Mirror Image key Positive/Negative Sort Finishing Finishing Stack Staple For stapling, the following limitations apply Having copies stapled automatically after copying Changing the staple position Stapling copies manually after copying Bin sorter stapler. ⋅ Bin sorter stapler. → Combination Chart OHP ColorTwin Text Photo 100 101 102 Color Balance Adjustment Color Balance103 Color Balance Program Storing the adjusted color balance104 Press the Color Balance Program key 105 Recalling the color balance Color Adjustment Press the Color Adjustment key106 107 Adjust the color with the keys 108 Image Adjustment Press the Image Adjustment key Soft/Sharp, Contrast, Background Density, and Pastel109 110 Program User Color Adjusting Colors Based on the Selected Color111 Press the Prog. User Color key 112 113 Mixing Colors Manually with the Number Keys 114 115 Sampling the User Color Option 116 117 What is Area Editing? 118 How to Edit Areas 119 Designating Areas 120 Designate Area Display 121 Designate Area Tools Rectangle Area Shapes122 Press the Confirm Selection key 123 Right Angle Polygon and Polygon Multi-Closed Loop Closed Loop124 Press the Area Editing key Rectangle frame Frame/Line125 Press the Frame / Line key Right Angle Polygon frame and Polygon frame 126Press the Area Editing key Press the Frame / Line key 127 Line 128 129 130 Selecting Modes for Designated Areas Area Editing Press the Col. /Image Adjust., Color Creation keyBasic modes 131 132 Delete Area 133 Save Area 134 Editing color and widths 135 Selecting Modes for Outside Designated Areas Save Area 136Press the Area Edit or Outside Area key 137 Changing Basic Settings for the Entire Image Press the Basic Settings key138 139 Change Modes Checking and Changing Areas140 Press the Confirm Areas key Press the Change Setting key Adding Areas141 142 Erasing an Area 143 Erasing a Group Press the Delete Group key 144 Press the Cancel Editing key Exiting Area Editing145 146 Combination Chart for Area Editing 147 Combination Chart for Area Editing 148 149 If Your Machine Does not Operate as You Want What to Do if Something Goes Wrong 150 151 If You Cannot Make Copies as You Want Exposure Glass 152 Changing The Toner Cartridge 153 Loading Paper Non-recommended Paper for Paper Trays154 155 Loading Paper in the Paper Tray Changing The Toner Cartridge Pulling Out the Toner Cartridge156 157 158 When you use the Cartridge Replacement Tool 159 Setting the New Toner Cartridge Turn the knob clockwise to the T mark until it clicks Clearing Misfeeds Check the Misfeed Location Display161 162 Clearing Paper Misfeeds 163 164 Adding Staples 165 166 Removing Jammed Staples 167 168 169 Changing Paper Size 170 171 Changing Paper Size with the User Tools 172 Press the System Settings key Press the System Settings or Copier Features key Accessing the User ToolsUser Tools 173 174 Exiting from the User Tools 175 System settings 176 177 178 179 General Features 180 Select the User Ratio 1 or User Ratio 2 key 181 Change ProgramClear Delete All Reset Counters Counter List Print183 Duplex/ADF/Sorter 184 Special Mode Programs Auto Color Calibration185 186 187 Dos and Donts Machine Environment Where to Put Your MachineOptimum environmental conditions Environments to avoid 189 Power Connection 190 Access to Machine Exposure Glass Maintaining Your MachinePlaten Cover 191 192 Document Feeder Remarks Copier193 Use and Storage of Supplies Copy Paper194 Paper Storage Toner Storage195 196 Mainframe Black, Yellow, Magenta, Cyan Copying speed full size Full color 4 colorsBlue Magenta + Cyan, Green Yellow + Cyan Red Yellow + Magenta Non-reproduction area Power consumptionToner replenishment Warm-up time Dimensions W ⋅ D ⋅ H up to the exposure glass Noise Emission *1 Sound power levelWeight Sound pressure level *2 Document Feeder Option Bin Sorter Stapler Option Bin capacity Paper size for binsStapler capacity 203 204 Bin Sorter Option Available paper size Sheet Tray Unit OptionPaper capacity 205 206 Multi-access Sample operations207 Tion 208 209 Index 210