Ricoh 4506 operating instructions 184, Duplex/ADF/Sorter

6

Changing the Machine's Settings

Menu	Description
Inkjet Output Mode	Specifies the type of image adjustment for Inkjet Output mode.
Setting	•	1	– emphasize yellow
	•	2	– emphasize red and yellow
	•	3	– emphasize red and blue
	If you want to emphasis yellow, select 1.
	If you want to emphasis red and yellow, select 2.
	If you want to emphasis red and blue, select 3.

	Note
	❒ Default: 1
Duplex/ADF/Sorter
Menu	Description
Duplex Tray Auto	When making two-sided copies from one-sided originals, if the last
Clear	original is an odd page, the last copy will be automatically delivered
	with the reverse side blank. You can cancel this setting.
	Note
	❒ Default: On
SADF Auto Reset	When you set one original at a time in the document feeder, the Auto
Timer	Feed indicator lights for a selected time after an original is fed to show
	that the document feeder is ready for another original. The time can be
	set from 1 second to 99 seconds.
	Note
	❒ Default: 5 seconds
ADF Thin paper	Use when changing the type of originals to be fed. Select this function
	to avoid damaging thin originals (40 - 52g/m2, 11-14 lb) set in the doc-
	ument feeder.
	Note
	❒ Default: Off
ADF Mixed Sizes	By default, you cannot set originals of different sizes at one time in the
	document feeder. You can cancel this setting.
	Note
	❒ Default: Off
	❒ If you select [On], the copying speed will be reduced.
	❒ When setting different length originals, all originals must be flush
	with the back fence of the document feeder.
	❒ Smaller originals might be skewed a little.
ADF Auto Paper Se- By default, Auto Paper Select is selected when you set originals in the
lect	document feeder. You can cancel this setting.

Note

❒Default: On

184