Basic Procedure

You cannot use this function for OHP transparencies, translucent paper, ad- hesive labels and postcards.

Do not use copy paper that has been already copied onto by other machines.

If the copy paper is bent, correct it before setting paper in the bypass tray. If the bend is not corrected, a paper misfeed might occur.

A B

Open the bypass tray.

2

Insert the paper into the bypass tray.

Note

Make sure the front side (the side that has been copied onto) faces down.

C D E

F G

Press the [Normal] or [Thick] key.

Press the [K/ L] key to select paper orientation.

Press the [Duplex Back] key.

Note

To copy onto custom size paper, press the [Custom Size] key and select or enter the size. For details, ⇒ P.41 “Copying onto custom size paper with the bypass tray”.

Press the [OK] key.

Adjust the paper guides to the paper size.

Note

Make sure that the paper guides match the paper size. If the paper guides are not adjusted to the paper size properly, paper might be skewed or a pa- per misfeed might occur.

H Set your originals, then press the {Start} key.

47

Page 59
Image 59
Ricoh 4506 operating instructions Open the bypass tray Insert the paper into the bypass tray