Ricoh 4506 operating instructions Copying onto custom size paper with the bypass tray

Basic Procedure

E Adjust the paper guides to the paper size.

1

2

2

3

4

TRSH050E

1.Horizontal size

2.Vertical size

3.Extender

4.Paper guides

Note

❒Make sure the paper size and direction in the bypass tray is displayed on the operation panel.

❒Make sure that the paper guides matches to the paper size. If the paper guides are not adjusted to the paper size properly, paper might be skewed or a paper misfeed might occur.

❒With large copy paper (more than A4L, 81/2" ⋅ 11"L), swing out the ex- tender.

F With the side you wish to copy onto face up, insert the paper into the by- pass tray until it stops.

G Set your originals, then press the {Start} key.

Copying onto custom size paper with the bypass tray

Preparation

You can register custom paper sizes you use often in keys [Custom 1], [Custom 2], and [Custom 3] with the user tools. ⇒ P.175 “System settings”.

Note

❒Be sure to set the paper size or a paper misfeed might occur.

A B C

Open the bypass tray.

Press the [Normal], [Thick] or [OHP] key.

Press the [K/L] key to select paper orientation.

41