Ricoh 4506 operating instructions Copying onto standard size paper with the bypass tray

Basic Procedure

❒When you copy onto OHP transparencies, you can select whether a blank slip sheet is inserted between OHP transparencies.

2

❒When you set several sheets at a time, fan them to get air between them before loading.

❒If the copy paper is curled, gently roll it to remove the curl.

❒When you copy onto OHP transparencies, insert them with the copy side up.

❒Do not stack copy paper above the limit mark.

❒If the copy paper is bent, correct it before setting paper in the bypass tray. If the bend is not corrected, a paper misfeed might occur.

❒When the optional sorter stapler is installed, copies made onto thick or OHP transparencies are not delivered in the proof tray but in the first bin instead.

❒When setting custom size paper, be sure to set the size after pressing the [Cus- tom Size] key.

Copying onto standard size paper with the bypass tray

Note

❒When you copy onto the reverse side of paper that has been already copied onto, ⇒ P.46 “Copying onto the reverse side of paper”.

A Open the bypass tray.

39