Ricoh JP1210, JP1250 When the open cover/unit indicator M lights, When other indicators light

SilverV-gb.book Page 82 Monday, May 15, 2000 3:32 PM

What to do If Something Goes Wrong

RCAUTION:

•Be careful not to cut yourself on any sharp edges when you reach inside the machine to remove misfed sheets of paper or masters.

Note

❒To prevent misfeeds, do not leave any torn scraps of paper within the ma- chine.

❒When clearing misfeeds, do not turn off the main switch. If you do, your copy settings are cleared.

❒If misfeeds occur repeatedly, contact your service representative.

❖When the open cover/unit indicator (M) lights

	Monitor	Guidance Display and Action	Page
	M	CLOSE THE COVER	⇒ P.97 “When the Open Cover/Unit In-
		• Close the original tray unit.	dicator (M) Lights”.
5	• Close the front door.
		CLOSE THE PLOTTER COVER
		• Close the right side cover and
		the plotter cover.
		CLOSE THE ADF COVER	⇒ P.97 “When the Open Cover/Unit In-
		• Close the optional ADF unit.	dicator (M) Lights”.
		SET THE DRUM COMPLETELY
	❖ When the supply/exchange indicators light
	Monitor	Guidance Display and Action	Page
	B	LOAD MORE PAPER	⇒ P.73 “Loading Paper on the Paper
			Feed Tray”.
	j	LOAD NEW INK CARTRIDGE	⇒ P.75 “When the Add Ink Indicator
			(j) Lights”.
	C	LOAD NEW MASTER ROLL	⇒ P.77 “Master Roll Replacement”.
	k	EMPTY MASTER EJECT BOX	⇒ P.99 “When the Master Eject Indica-
		• Remove the used master.	tor (k) Lights”.
		SET THE MASTER EJECT BOX
	❖ When other indicators light
	Monitor	Guidance Display and Action	Page
	u	SET THE KEY COUNTER	⇒ P.100 “When Other Indicators
			Light”.

82