Ricoh JP1210, JP1250 Printing in Two colours, Enter the number of prints with the number keys

SilverV-gb.book Page 54 Monday, May 15, 2000 3:32 PM

Optional Functions

Printing in Two colours

After printing in one colour, you can print in another colour on the same side of the print.

2	Important
	❒ Leave the prints for a while before
	printing on them again to let the

ink dry.

❒If the prints are not dry, the paper feed roller might become dirty. In this case, wipe off the roller with a cloth.

Note

❒You cannot print in two colours at one time.

A Prepare the two originals. Set the first original on the exposure glass.

C Check the image position of the trial or proof print.

Note

❒If the image position is not cor- rect, adjust it using the {Image Position} keys (see ⇒ P.9 “Shift- ing the Print Image Position For-

ward or Backward”) or the side tray fine adjusting dial (see ⇒ P.10 “Shifting the Print Image Po- sition to the Right or Left”).

D Enter the number of prints with the number keys.

TSLS011E

E Press the {Print} key.

GRPREP0E

B Press the {Start} key.

TSLS014E

TSLS012E

54