Ricoh JP1250, JP1210 operating instructions Combine-Combining 2 Originals onto One Print

SilverV-gb.book Page 61 Monday, May 15, 2000 3:32 PM

		Changing the Settings of Service Programs
SP No.	Mode	Function
25	Clear 2 In 1	By default, when master making is finished in Com-
		bine Copies mode, this mode stays selected for the
		next master making.
		If you want master making turned off, select “1”.
		Note
		❒ Default: 0
		❒ Adjustable value: 0: No 1: Yes
		❒ Even if you select “1” in this mode, Combine Cop-
		ies mode is not cleared when the next original are
		set in the optional document feeder.
		❒ For details about Combine Copies, see ⇒ P.33
		“Combine—Combining 2 Originals onto One Print”.
29	Pht Backgrnd Cor-	When you make prints in Photo or Letter/Photo
	rect	mode, the background of the prints might become
		dirty. You can prevent this using this function.

Note

❒Default: 0

❒Adjustment value: 0: No 1: Yes

40 Original Specifies the image mode at power on.

Note

❒Default: 0

❒Adjustment value:

•0: Letter mode

•1: Letter/Photo mode

•2: Photo mode

41 Image density Specifies the image density at power on.

Note

❒Default: 1

❒Adjustment value:

•0: Light

•1: Standard

•2: Dark

•3: Darker

3

61