Accessing Service Programs | Ricoh JP1250, JP1210 specification

SilverV-gb.book Page 57 Monday, May 15, 2000 3:32 PM

3. Service Program Mode

Accessing Service Programs

The service programs can be set by following this procedure.

Reference

For the service program menu, see

⇒P.59 “Service Program Menu”.

A Press the {Clear Modes/Energy Sav-

er} key.

B Hold down the {Clear/Stop} key for at least 3 seconds.

TSLS01AE

The SP-mode display appears on the guidance display.

Note

C With the number keys, enter the desired service program number (SP No.).

TSLS011E

Reference

For the SP No., see ⇒ P.59 “Service Program Menu”.

When you want to leave the service program mode

A Press the {Clear Modes/Energy

Saver} key.

Reference

❒If you press the wrong key, try pressing the above keys from the beginning.

If you want to change the set- tings of a selected service program, see ⇒ P.58 “Chang- ing the Settings of Service Pro- grams”.

57

Image 77

Ricoh JP1250, JP1210 operating instructions Accessing Service Programs, Press the Clear Modes/Energy Sav

Contents

Operating Instructions JP1210/1250 Overseas Affiliates Introduction Means Power ON. b means Power OFF Safety During Operation Safety Information SilverV-gb.book Page ii Monday, May 15, 2000 332 PM Iii How to Read this ManualSymbols What You Can Do with this Machine Erasing Edge Margins Erasing Centre and Edge MarginsErasing the Shadow of Pasted Originals Printing on Thick or Thin Paper Group Printing from Different Originals Storing Your Print Settings in MemoryCombining Originals onto One Print Skip Feed Printing Vii Machine Exterior Viii Machine Interior Originals document feeder Options Keys Operation Panel Image Position key Fine keyProgram key Clear Modes/Energy Saver key Xii Indicators Table of Contents Xiv 101 100102 107 Xvi Printing Paper Operation Originals Loading Paper Preparation for PrintingCarefully open the paper feed tray Place the paper on the paper feed tray Open the paper delivery tray Setting Up the Paper Delivery TrayTurn on the main switch Lower the platen cover Press the Start key Standard PrintingPrinting SilverV-gb.book Page 6 Monday, May 15, 2000 332 PM Restoring Paper Feed and Paper Delivery Trays Energy Saver Mode Saving Energy Shifting the Image Position Forward or Backward Adjusting the Print Image PositionShifting the Image Position to the Right or Left Shifting the Print Image Position Forward or Backward Shifting the image to the left Shifting the Print Image Position to the Right or LeftShifting the image to the right Before Making a Master Adjusting the Print Image DensityBefore Making a Master After Making a Master Tint Mode-Halftone Printing Fine Mode-Making Clear Prints Changing the Printing Speed Change the number of prints or check the completed prints Stopping the Machine during the Multi- print RunPress the Clear/Stop key Reduction Inch version Reduction Metric version Make your prints Enlargement Metric versionEnlargement Inch version Centre/Edge Erase-Erasing centre and Edge Margins Check Indicator is blinkingCenter/Edge Erase key again Press the or key to se- lect the paper size and direction Set the book on the exposure glass Center/Edge Erase key twice Press the Center/Edge Erase key to select Edge Erase modeEdge Erase-Erasing Edge Margins Edge Erase-Erasing Edge Margins Press the Paste Shadow Erase key Paste Shadow Erase-Erasing the Shadow of Pasted OriginalsSet the original on the exposure glass Pressure Lever Position Printing on Thick or Thin Paper Letter mode Photo modeLetter/Photo mode Selecting Original Type Economy Mode-Saving Ink Press the Auto Cycle key Auto Cycle-Printing from Several Originals at OnceEnter the number of prints re- quired with the number keys Penser, turn on the tape dispenser Power switchIf you use the optional tape dis Class Mode-Group Printing from the Same Original Press the Memory/Class key to light the Class indicatorPress the q key With the number keys, enter the desired number of sets Turn on the optional tape dis- penser power switch Memory Mode-Group Printing from Different Originals Set the first original face down on the exposure glass Press the q key again Repeat this step until you have finished printing Press the Auto Cycle key Press the Print key Inch version Combine-Combining 2 Originals onto One PrintMetric version Set the first original face down Press the Center/Edge Erase To Choose a CustomReproduction Ratio Enter the number of prints with the number keys Skip Feed Printing Storing Your Settings Program-Storing Your Print Settings in Memory Recalling a Program Press the q key Enter 1 with the number keys Protecting a ProgramPress the Start key Press the q key Want to remove protection from Removing Program ProtectionSelect the program number you Security Mode-Printing Secret Documents Document Feeder Exterior Printing Using the Optional 30 Originals Document Feeder Originals Adjust the guide to the original size Setting Originals in the Document Feeder Check the print paper size and the reproduction ratio Set the desired settings and press the Start keyCombine Copies with the Document Feeder Press the Combine key to select your desired mode Memory Mode with the Document Feeder Set your originals face up into the document feeder Livered Turn on the optional tape dispenser power switch SilverV-gb.book Page 51 Monday, May 15, 2000 332 PM Making Colour Prints Colour Printing Using the Optional Colour DrumChanging the colour Drum Unit Open the front door Insert the colour drum unit along the guide rail Pull out the drum unit handleSlide in the drum unit until it locks in position Lower the drum unit lock lever Printing in Two colours Check the image position Press the Print key Exchange the drum unit. See ⇒Set the second original and press the Start key SilverV-gb.book Page 56 Monday, May 15, 2000 332 PM Press the Clear Modes/Energy Sav Accessing Service ProgramsEr key Hold down the Clear/Stop key for at least 3 seconds Press the Clear Modes/Energy Saver key Reference Enter the desired value or mode with the number keys Changing the Settings of Service ProgramsPress the q key to store the desired value or mode After entering the desired SP No., press the q key Press the Clear Modes/Energy Saver key Service Program Menu SilverV-gb.book Page 60 Monday, May 15, 2000 332 PM Combine-Combining 2 Originals onto One Print SilverV-gb.book Page 62 Monday, May 15, 2000 332 PM Memory Mode-Group Printing from Different Default 3 Min. minutes SilverV-gb.book Page 65 Monday, May 15, 2000 332 PM User Codes How to Set User Code Mode #Er key Enter 120 with the number keys and press the q key Enter 1 Yes with the number keys and then press the q key Er key How to Use User Code ModeDown the Clear Modes/Energy Sav Press the Clear Modes/Energy Sav- er key How to Check the User Code Counter # Enter 1 Yes with the number keys and press the q key How to Clear the User Code Counter #Er key Enter 122 with the number keys and press the q key Enter 123 with the number keys and press the q key Enter 124 with the number keys and press the q key How to Clear the User Code Total Counter # SilverV-gb.book Page 72 Monday, May 15, 2000 332 PM Replenishing Paper Loading Paper on the Paper Feed TrayPress the Paper Feed Tray Down Load paper on the paper feed tray Place the paper on the paper feed Adjust the side plates and the end plateChanging the Paper Size Pull out the ink holder and remove the used ink cartridge When the Add Ink Indicator j Lights Insert the new cartridge into the ink holder Remove the cap of the new ink cartridge Open the right side cover Open the plotter cover Master Roll ReplacementOpen the original tray Close the plotter cover Set the paper edge of the master roll as shown Placing a New Roll of Tape in the Tape Dispenser Option Turn on the power switch of the tape dispenserOpen the cover of the tape dis- penser As shown, put the roll in the dis- penser SilverV-gb.book Page 80 Monday, May 15, 2000 332 PM If Your Machine does not Operate as You Want When the misfeed indicator x lights When other indicators light When the open cover/unit indicator M lights Guidance Display Meaning + Original JAM. Remove Original Clearing MisfeedsAfter clearing misfeeds Press the ADF unit open lever and open the ADF unit Close the ADF unit until it locks in position Pull out the original gently To prevent original misfeeds Slowly but firmly pull out the paper +PAPER Feed JAM. Remove Jammed PaperPull out the drum unit Remove the misfed paper To prevent paper misfeeds SilverV-gb.book Page 89 Monday, May 15, 2000 332 PM + Master Feed JAM. Remove Jammed Master Return the original tray to its original position +PAPER Wrap JAM. Remove Jammed Paper SilverV-gb.book Page 93 Monday, May 15, 2000 332 PM Pull out the master eject box +MASTER Eject JAM. Remove Jammed Master Return the master eject box to its original position Remove the misfed master Pull the master out of the master clamp +DELIVERY JAM. Remove Jammed Paper Original Tray When the Open Cover/Unit Indicator M LightsFront Door ADF Unit Option SilverV-gb.book Page 98 Monday, May 15, 2000 332 PM Take out the master eject box and remove the used masters When the Master Eject Indicator k Lights 100 When Other Indicators Light Reduce the printing speed by pressing the W key When the Prints are Thrown Over the Paper Delivery Tray101 102 Poor PrintingDirt on the Back Side of Paper 103 Clean the pressure roller with a clean cloth 104 Dirt on the Front Side of Paper Black Line/Stain 105 White Prints or Incomplete Prints Remove paper that is stuck to the drum 106Remove the master from the drum 107 Operation NotesGeneral Cautions 108 109 Print Paper 110 Environmental Conditions Where to Put Your MachineOptimum environmental conditions Environments to avoid Access to Machine Power ConnectionMain Frame 112 Main Frame Maintaining Your MachineExposure Glass Platen Cover 114 Optional Document FeederSeparation Roller 115 Combination Chart 116 Main Frame Printing Paper Size Print Paper WeightLeading Edge Margin Print Speed Weight Dimensions W × D × HPower Source Noise Emission *1 120 Power ConsumptionOptional Equipment Originals Document Feeder Original WeightOriginal Capacity 121 122 Consumables 123 Index Reduce key 124