Ricoh JP1210, JP1250 Selecting Original Type, Letter mode, Letter/Photo mode

SilverV-gb.book Page 24 Monday, May 15, 2000 3:32 PM

Operation

Selecting Original Type

1

24

Select one of the following three types to match your originals:

❖Photo mode

Delicate tones of photographs and pictures can be reproduced with this mode.

❖Letter mode

Select this mode when your origi- nals contain only letters (no pic- tures).

❖Letter/Photo mode

Select this mode when your origi- nals contain photographs or pic- tures with letters.

Note

❒Moire patterns might occur when screened originals are printed.

❒When using Photo mode to print originals with both letter and pho- tographs, the letter will appear

lighter. To avoid this, select Let- ter/Photo mode with the {Type of Original} key.

A Press the {Type of Original} key to select Photo mode.

B Press the {Image Density}key to ad- just the image density.

C Set your originals on the exposure glass or in the optional document feeder.

D Press the {Start} key.

TSLS012E

E Check the image position of the trial or proof print.

Note

❒If the image position is not cor- rect, adjust it using the {Image Position} keys (see ⇒ P.9 “Shift- ing the Print Image Position For-

ward or Backward”) or the side tray fine adjusting dial (see ⇒ P.10 “Shifting the Print Image Po- sition to the Right or Left”).

F Make your prints.