Ricoh JP1250, JP1210 Printing on Thick or Thin Paper, Pressure Lever Position

SilverV-gb.book Page 23 Monday, May 15, 2000 3:32 PM

Printing on Thick or Thin Paper

Printing on Thick or Thin Paper

When you make prints on thick (127.9 to 209.3g/m2, 34.0 to 55.6 lb), stand- ard (52.3 to 127.9g/m2, 13.9 to 34.0 lb) or thin (47.1 to 52.3g/m2, 12.5 to 13.9 lb) paper, perform the following steps.

Pressure Lever Position

A Position pressure lever to thick, standard, or thin paper position.

TSLH01CE

Note

❒When you use paper heavier than 127.9g/m2, 34.0 lb and lighter than 209.3g/m2, 55.6 lb, position pressure lever to the Thick paper position.

❒When you use paper heavier than 52.3g/m2, 13.9 lb and light- er than 127.9g/m2, 34.0 lb, posi- tion pressure lever to the Standard paper position.

❒When you use paper heavier than 47.1g/m2, 12.5 lb and light- er than 52.3g/m2, 13.9 lb, posi- tion pressure lever to the Thin paper position.

❒In the case of paper smaller than

B5, 51/2" × 81/2" and heavier	1
than 81.4g/m2 (21.6 lb), move

the feed roller pressure lever to the Thin paper position.

B Make sure that paper feed side plates touch the paper lightly.

ZCTH150E

C When you finish prints, position pressure lever to the Standard pa- per position.

TSLH01CE

23