Ricoh JP1210, JP1250 operating instructions Originals

SilverV-gb.book Page 44 Monday, May 15, 2000 3:32 PM

Optional Functions

Originals

Setting the following originals in the document feeder might cause original mis- feeds or damage to the originals.

Set these originals on the exposure glass.

• Originals heavier than 90g/m2, 23.9 lb (when setting a stack of originals)

2 • Originals lighter than 50g/m2, 13.3 lb (when setting a stack of originals)

•Originals heavier than 120g/m2, 31.9 lb (when setting one original at a time)

•Originals lighter than 40g/m2, 10.6 lb (when setting one original at a time)

•Carbon coated originals

•Damaged originals

•Originals with glue on them

•Originals perforated for ring binders

•Book originals

•Originals written with a pencil or ball-point pen

•Originals smaller than 148mm × 105mm, 5.8" × 4.1"

•Originals larger than 257mm × 364mm, 10.2" × 14.4"

•Folded, curled, creased originals

•Bound, stapled, or clipped originals

•OHP transparencies

•Translucent paper

•Pasted originals

Note

❒If you use paste-up originals, make sure the pasted parts hold firmly to the base sheet and press the {Paste Shadow Erase} key. If the thickness of the paste- up original is more than 0.1mm, and the space between the pasted parts is less than 2mm, 0.08", a shadow might appear on the prints.

❒The first 5mm, 0.2", of the leading edge cannot be printed. Make sure the lead- ing edge margin is at least 5mm, 0.2".

Original Print

a

❒a: 5mm, 0.2"

44