Ricoh JP1250, JP1210 operating instructions Memory Mode-Group Printing from Different

SilverV-gb.book Page 63 Monday, May 15, 2000 3:32 PM

		Changing the Settings of Service Programs
SP No.	Mode	Function
87	Memory Print	Each print set or stack will contain the number of
		prints you program in Memory mode.
		If set to Memory, Memory mode will work.
		If set to Stack, Stack mode will work.
		Note
		❒ Default: 0
		❒ Adjustment value: 0: Memory 1: Stack
		❒ For details about Memory mode, see ⇒ P.30
		“Memory Mode—Group Printing from Different
		Originals”.
88	Auto Memory/	In this function, the machine stops printing for 2 sec-
	Class	onds after one set of prints are completed in Memory
		mode and Class mode. This gives you the chance to
		separate each set when you do not have an optional
		tape dispenser.
		For example, you can remove prints one by one from
		the paper delivery tray or insert one sheet of paper
		between the prints.

Note

❒Default: 0

❒Adjustment value: 0: No 1: Yes

113	Resettable Count	Used to display the total number of masters and
		prints.
		• M: Total number of masters
		• P: Total number of prints
114	CLR Resettable	Clears the resettable master/print counter.
	Count	Note

❒Default: 0

❒Adjustment value: 0: No 1: Yes

3

63