Ricoh JP1250 Press the q key again, Set the first original face down on the exposure glass

SilverV-gb.book Page 31 Monday, May 15, 2000 3:32 PM

Memory Mode—Group Printing from Different Originals

D With the number keys, enter the number of prints for the second original.

TSLS011E

E Press the {q} key.

This stores the number of prints to be made for the second original in memory 2.

Note

❒Repeat steps D and E for each original.

❒The number of prints for up to 20 originals can be stored.

F Press the {q} key again.

The memory returns to memory 1.

TSLS01JE

Note

❒If you store the number of prints for 20 originals, the memory

number returns to 1. It is not necessary to press the {q} key.

G Set the first original face down on the exposure glass.

1

TSLH010E

Note

❒Set originals one sheet at a time in the same order that you stored them in memory.

H Press the {Start} key.

TSLS012E

I Check the image position of the trial or proof print.

Note

❒If the image position is not cor- rect, adjust it using the {Image Position} keys (see ⇒ P.9 “Shift- ing the Print Image Position For-

ward or Backward”) or the side tray fine adjusting dial (see ⇒ P.10 “Shifting the Print Image Po- sition to the Right or Left”).

31