Ricoh JP1250, JP1210 operating instructions Turn on the optional tape dis- penser power switch

SilverV-gb.book Page 29 Monday, May 15, 2000 3:32 PM

Class Mode—Group Printing from the Same Original

E Turn on the optional tape dis- penser power switch.

On	Off
	TSLP013E

F Set one original face down on the exposure glass or in the optional document feeder.

G Press the {Start} key.

TSLS012E

H Check the image position of the trial or proof print.

Note

❒If the image position is not cor- rect, adjust it using the {Image Position} keys (see ⇒ P.9 “Shift- ing the Print Image Position For-

ward or Backward”) or the side tray fine adjusting dial (see ⇒ P.10 “Shifting the Print Image Po- sition to the Right or Left”).

I Make your prints.

1

TSLS014E

Note

❒After the last page of each print- ing set is fed out to the paper de- livery tray, the tape dispenser drops a strip of paper on the top of the paper stack.

❒If the power switch of the op- tional tape dispenser is turned off or the tape dispenser is not installed in your machine, the group printing cycle stops after each set is delivered. Remove the set of prints from the paper

delivery tray and press the {Print} key to start the next group printing cycle.

29