Ricoh JP1250, JP1210 Enlargement Metric version, Enlargement Inch version, Make your prints

SilverV-gb.book Page 17 Monday, May 15, 2000 3:32 PM

Preset Reduce/Enlarge—Reducing and Enlarging Using Preset Ratios

❖Enlargement (Metric version)

Enlarge-	Original	Print Size
ment Ratio	Size
141 %	B5	B4
	A5	A4
122 %	A4	B4
	A5	B5
115 %	B5	A4
	B6	A5

❖ Enlargement (Inch version)

Enlarge-	Original	Print Size
ment Ratio	Size
155 %	51/2" ×	81/2" × 14"
	81/2"
129 %	51/2" ×	81/2" × 11"
	81/2"
121 %	—	—

A Select the desired reduction or en- largement ratio using the {Re- duce} key or the {Enlarge} key.

B Make sure that the original and the print paper are the correct size.

C Set your originals on the exposure glass or in the optional document feeder.

D Press the {Start} key.

1

TSLS012E

E Check the image position of the trial or proof print.

Note

❒If the image position is not cor- rect, adjust it using the {Image Position} keys (see ⇒ P.9 “Shift- ing the Print Image Position For-

ward or Backward”) or the side tray fine adjusting dial (see ⇒ P.10 “Shifting the Print Image Po- sition to the Right or Left”).

F Make your prints.

17