Ricoh JP1250, JP1210 operating instructions Fine Mode-Making Clear Prints

SilverV-gb.book Page 13 Monday, May 15, 2000 3:32 PM

Fine Mode—Making Clear Prints

Fine Mode—Making Clear Prints

Use the {Fine} key to make clear prints.

A Press the {Fine} key to select Fine mode.

D Enter the number of prints with	1
the number keys.

E Press the {Print} key.

TSLS014E

B Set your originals on the exposure glass or in the optional document feeder.

C Press the {Start} key. Check the image position of the trial or proof print.

TSLS012E

Note

❒If the image position is not cor- rect, adjust it using the {Image Position} keys (see ⇒ P.9 “Ad- justing the Print Image Position”)

or the side tray fine adjusting dial (see ⇒ P.10 “Shifting the Print Image Position to the Right or Left”).

13