Auto tuning - FM

Touch the Auto Tune button until Auto Tune appears

AutoUTO TuneUNE

in yellow.

 

Touch the Left or Right buttons to cause the radio to scan to fi nd a station. It will stop scanning when it fi nds a radio station of suffi cient strength. When the end of the waveband is reached the radio will recommence tuning from the opposite end of the waveband.

The display will show the frequency of the signal which has been found. If RDS information is available, after a few seconds the display will show the radio station name. Stereo or Mono broadcasts are indicated at the top of the screen.

If you only hear hiss or interference, simply touch the Left or Right buttons to scan further. Your radio may have found a spurious interference signal. The yellow markers at the top of the display show the relative strength of the FM signal being received.

Manual tuning - FM

Ensure Autotune is deselected. (Auto Tune will be

AutoUTO TuneUNE

displayed in white).

 

Touch to control the frequency that the radio will tune to. The frequency will change in steps of 50kHz.

When the end of the waveband is reached the radio will recommence tuning from the opposite end of the waveband.

Alternatively move the dial scale pointer on the screen to manually select the frequency.

FM Radio

15:05 26 Jun 2010

STEREO Signal

87.50MHz

88

90

94

98

103

106 108

AutoAUTOTuneTUNE

FM

15:05 26 Jun 2010

STEREO Signal

87.50MHz

88

90

94

98

103

106 108

AUTOAuto TuneTUNE

FM

If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)

66

Page 67
Image 67
Roberts Radio ColourStream manual FM Radio, Auto tuning FM, Manual tuning FM