Connecting to your computer network - cont.
15.If your network is not found, it may be because the router is confi gured not to broadcast the SSID. You should then scroll through the menu and select Manual settings option in order to enter the network details manually. This is described in 'Manual Network Confi guration', see page 18.
If your network name is being broadcast, and it was not found, then try
16.When the SSID for the wireless network you wish to connect to appears on the screen, touch to select. If WiFi Protected Setup (WPS) was indicated, you will see an additional menu at this point, otherwise proceed to step 17.
Choose one of the WPS menu options as required for your router (WPS may be via push button, or using an identifi cation number).
'Push Button' - the display prompts you to press the WPS button on your router or access point and touch OK on screen. The two devices should then connect with the encryption key sent automatically to the radio.
'PIN' - the display shows an identifi cation number which you must enter into your router using a web browser (refer to your router's user documentation). Then touch OK on screen on the radio. The two devices should then connect with the encryption key sent automatically to the radio.
'Skip WPS' - if you wish to enter the encryption key yourself.
IfyouchosePushButtonorPINthescreenwillthenshow'Connecting...' and then 'Setup wizard completed'. Touch OK to exit the setup wizard and then go to paragraph 20 on the next page.
17.If your network is confi gured without an encryption key, the screen should say 'Connecting...', and then 'Setup wizard completed'. Touch OK to exit the setup wizard and enter Standby mode.
If this is the case then you have successfully connected your radio to your network, so please go to paragraph 20 on the next page.
18.If the screen displays 'Network Key:', it is because the network is using one of the encryption systems: Wired Equivalent Privacy (WEP) or WiFi Protected Access (WPA). You will need to enter the correct WEP or WPA key into the radio to allow it to communicate with your wireless network. If you do not have the WEP or WPA key, then you should obtain it from the person who set up your network. Some wireless routers may come with an encryption key already set up by the supplier, in which case you should refer to the documentation provided with it. WPA is used here to also include WPA2.
00:00
Network Wizard
Paul’s network <WPS>
<Rescan>
<Wired Network>
Manual settings
Network key: |
|
123 - JONES | Setup Wizard |
| |
123 |
|
Setup Wizard |
|
15
