Scan setting - FM
When using the FM mode your radio can be set either to scan local stations or to scan all stations including distant radio stations.
From the FM Menu list touch Stop on stations. The current setting will be displayed in yellow. To set your radio so that only the stations with the strongest signals are found during scanning touch Stop on stations until 'Strong' appears on the display. (Normally this will restrict scanning to local transmissions).
Alternatively, to set your radio so that all available stations are found during scanning (local and distant transmissions) touch Stop on stations until 'All' appears on the display.
Stereo / Mono switching - FM
If the FM radio station being listened to has a weak signal, some hiss may be audible. It is possible to reduce this hiss by forcing the radio to play the station in mono rather than stereo.
Enter the FM Menu list.The current stereo/mono setting will be displayed in yellow.
To switch to mono mode in order to reduce the hiss from a weak FM signal select Force mono until 'Yes' appears on the display.
Alternatively, to return to the stereo/mono mode touch Force mono until 'No' appears on the display.
FM Radio
15:05 26 Jun 2010
FM Menu
My Favourites
Stop on stations | Strong |
Edit favourites |
|
Force mono | No |
FM |
|
15:05 26 Jun 2010
FM Menu
My Favourites
Stop on stations | Strong |
Edit favourites |
|
Force mono | Yes |
FM |
|
If you need any further advice, please call our Technical Helpline on 020 8758 0338 | 68 |
