|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Software update |
|
|
|
|
|
|
|
| Information |
| |||||||
From time to time, new software features for your radio may be developed. Your radio has therefore been designed to allow its internal software to be updated using your Internet connection.
You should not attempt to update your radio unless it is recommended to you by Roberts Customer Services. Updating the software may remove all network settings, radio station presets and alarm settings from your radio.
It is important that you do not attempt this procedure unless you have a good Internet connection and a reliable mains power supply. If the radio connects to your router using a WiFi connection, make sure that this is also reliable before proceeding.
From the home menu press the Settings mode button.The main settings menu will be displayed.
Settings
Select Miscellaneous settings.
Select Software update, the current setting will appear in yellow. If you want your radio to check periodically for new software versions select Enabled to proceed. If you wish to disable the software update select Disable.
To check if there are any software updates available currently, touch Check for Updates. The radio will check to see if an update is available. The display will show 'Checking'. If there are no updates then the display will show 'Software up to date'. If a software update is available your radio will then offer the choice of updating the software or not, displaying 'New version available. Update software?'. Touch Yes option if you wish to go through the update process.
If you choose to update your radio it will fi rst download the new software and will then reprogram its internal memory. This may take a few minutes depending on the speed of your internet connection.
Once the software update is completed, the radio will prompt you to restart. You may fi nd that you will need to reconfi gure your network connection following an update. You may also need to
VERY IMPORTANT: Do not switch off the power to the radio until the update operation is complete and the radio has restarted, otherwise the unit may become permanently damaged.
15:05 26 Jun 2010
Miscellaneous Settings
Sleep | OFF |
Standby Backlight Off | Never |
Software update | Enabled |
Check for Updates
15:05 | 26 Jun 2010 |
Miscellaneous Settings | |
Check for Updates | |
Display backlight | |
Software version | |
Factory reset | |
| Settings |
If you need any further advice, please call our Technical Helpline on 020 8758 0338 | 84 |
