Roberts Radio ColourStream manual Setup wizard completed

Connecting to your computer network - cont.

If your network allows automatic confi guration (which is normal) the radio will acquire a network address. The screen should say 'Connecting...', and then 'Setup wizard completed'. Touch OK to exit the setup wizard, the radio will enter Standby mode. You can then skip to paragraph 20 on page 16.

There are two indicator lights incorporated into the RJ-45 connector. If you have problems with your wired connection, they may help you to identify the possible cause of the problem.

Yellow ON = Link established; OFF = no connection

Yellow Flashing = Data transfer

Green ON = 100 Mbits/sec link; OFF = 10 Mbits/sec link

If your network does not support automatic confi guration or if you wish to set it up manually then you should select Manual Settings instead of selecting Wired in the Network Wizard, then see page 18.

13.If you plan to use a WiFi connection, you will fi rst need to identify your network in the list of network names presented by the Network Wizard. If no networks are found then you may have to get your wireless router working (please see the instructions supplied with it) or you may be too far from the router.

When the radio finds your wireless network, it displays the Network Name (SSID) for the wireless access point on the screen. This is a name that is allocated to the access point in your router by the person who set up the network - for example: 'Jones family' or 'Paul's network'. If the router supports WiFi Protected Setup, then '[WPS]' will be shown in front of the SSID.

It is possible, and in some locations highly likely, that your radio will fi nd more than one wireless network, in which case you should choose which one you need to connect to.

14.Scroll through the list to see the SSID for each wireless network that has been found. If your network is shown proceed to step 16 on the next page. If it is not shown then proceed to step 15.

If you make a mistake at any point, use the Back button to go back to the previous screen.

Configuration

15:09 23 Jun 2010

Setup wizard completed.

OK

00:00

Network Wizard

Setup Wizard

<WPS>

<Rescan>

<Wired Network>

Manual settings

00:00

Network Wizard

Setup Wizard

Smith

Jones

<WPS>

<Rescan>

Setup Wizard

If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri) 14