Roland JUNO-Gi Changing the Location of the Insert Eects (LOCATION)

108
Changing the Location of the Insert
Eects (LOCATION)
By default, the insert eects are connected (inserted) directly after
the input source. This means that you’ll be able to hear and record the
sound processed by the eect.
However, in some cases, you may wish to change this method of
connection. The JUNO-Gi lets you change the location where the insert
eects are connected, thus allowing you to use the eect in a variety
of ways.
1. In.the.recorder’s.eects.screen,.press.the.[1].(INS.FX).button.
The INSERT FX screen will appear.
2. Press.the.[4].(LOC).button.
The INSERT FX LOCATION screen will appear.
3. Use.the.VALUE.dial.or.the.[DEC].[INC].buttons.to.specify.the.
location.where.the.insert.eects.are.to.be.connected.
Value Explanation
INPUT.
<NORMAL>
This lets you monitor and record the sound that is
processed through the insert eects. Normally, you
should use this setting.
TRACK 1
(REC)
INPUT.
<REC.DRY>
This lets you monitor the sound that is processed
through the insert eects, but record the sound before
it has passed through the insert eects (i.e., record the
“dry” sound). Use this setting if you want to try out
various eect settings after recording.
g.03
TRACK 1
(REC)
TRACK..
1–8,..
1/2–7/8
This lets you apply the insert eects to the track
playback audio. Use this setting if you want to try out
eects after recording the dry sound, or if you want to
apply the eect only to a specic track.
g.03
TRACK 1
(PLAY)
RHYTHM
This lets you apply the insert eects to the rhythm
sound.
g.03
RHYTHM
Value Explanation
MASTER
Use this setting if you want to apply the eect to the
overall sound, such as when using the eect to modify
the sound during bounce-recording, or using the eect
to achieve a special sound.
TRACK 1
(PLAY)
TRACK 8
(PLAY)
RHYTHM
4. When.you’ve.nished.making.settings,.press.the.[EXIT].
button.