Roland JUNO-Gi 61: PITCH SHIFTER, 62: 2VOICE PITCH SHIFTER, 63: STEP PITCH SHIFTER

70
61: PITCH SHIFTER
A stereo pitch shifter.
L in
R in
Pitch Shifter
Pitch Shifter
L out
R out
2-Band EQ
2-Band EQ
Parameter Value Explanation
Coarse.#1 -24–+12 semi Adjusts the pitch of the pitch
shifted sound in semitone steps.
Fine.#1 -100–+100 cent Adjusts the pitch of the pitch
shifted sound in 2-cent steps.
Delay.Time 0–1300 msec, note
Adjusts the delay time from
the direct sound until the pitch
shifted sound is heard.
Feedback.# -98–+98%
Adjusts the proportion of the
pitch shifted sound that is fed
back into the eect. Negative (-)
settings will invert the phase.
Low.Gain -15–+15 dB Gain of the low range
High.Gain -15–+15 dB Gain of the high range
Balance.# D100:0W–D0:100W
Volume balance between the
direct sound (D) and the pitch
shifted sound (W)
Level 0–127 Output Level
62: 2VOICE PITCH SHIFTER
Shifts the pitch of the original sound. This 2-voice pitch shifter has two pitch shifters,
and can add two pitch shifted sounds to the original sound.
L in
R in
L out
R out
2Voice Pitch Shifter
Level 1
Balance W
Balance D
Balance W
Balance D
Level 1 Pan 2 R
Pan 1 L
Pan 1 R
Pan 2 L
Parameter Value Explanation
Pitch1.Coarse.#1 -24–+12 semi Adjusts the pitch of Pitch Shift 1
in semitone steps.
Pitch1.Fine.#1 -100–+100 cent Adjusts the pitch of Pitch Shift
Pitch 1 in 2-cent steps.
Pitch1.Delay 0–1300 msec, note
Adjusts the delay time from the
direct sound until the Pitch Shift
1 sound is heard.
Pitch1.Feedback.# -98–+98%
Adjusts the proportion of the
pitch shifted sound that is fed
back into the eect. Negative (-)
settings will invert the phase.
Pitch1.Pan.# L64–63R Stereo location of the Pitch Shift
1 sound
Pitch1.Level 0–127 Volume of the Pitch Shift1 sound
Pitch2.Coarse.#2 -24–+12 semi
Settings of the Pitch Shift 2
sound.
The parameters are the same as
for the Pitch Shift 1 sound.
Pitch2.Fine.#2 -100–+100 cent
Pitch2.Delay 0–1300 msec, note
Pitch2.Feedback.# -98–+98%
Pitch2.Pan.# L64–63R
Pitch2.Level 0–127
Parameter Value Explanation
Low.Gain -15–+15 dB Gain of the low range
High.Gain -15–+15 dB Gain of the high range
Balance.# D100:0W–D0:100W
Volume balance between the
direct sound (D) and the pitch
shifted sound (W)
Level 0–127 Output Level
63: STEP PITCH SHIFTER
A pitch shifter in which the amount of pitch shift is varied by a 16-step sequence.
L in
R in
Step Pitch Shifter
Step Pitch Shifter
L out
R out
2-Band
EQ
2-Band
EQ
Parameter Value Explanation
Step.01-16 -24–+12 semi Amount of pitch shift at each
step (semitone units)
Rate.# 0.05–10.0 Hz, note Rate at which the 16-step
sequence will cycle
Attack.# 0–127
Speed at which the amount of
pitch shift changes between
steps
Gate.Time.# 0–127 Duration of the pitch shifted
sound at each step
Fine -100–+100 cent Pitch shift adjustment for all
steps (2-cent units)
Delay.Time 0–1300 msec, note
Delay time from the original
sound until the pitch-shifted
sound is heard
Feedback.# -98–+98%
Proportion of the pitch-shifted
sound that is to be returned to
the input (negative values invert
the phase)
Low.Gain -15–+15 dB Gain of the low range
High.Gain -15–+15 dB Gain of the high range
Balance.# D100:0W–D0:100W
Volume balance of the original
sound (D) and pitch-shifted
sound (W)
Level 0–127 Output Level
MEMO
You can use multi-eect control to make the step sequence play again from
the beginning (p. 46).