45
Overview Appendix
USB Memory
Song Player
Digital Recorder
Synthesizer
Selecting Sounds Perform. Functions Editing/Eects Other Settings Rec/Play/Edit Eects Rhythm Pattern
Signal Flow and Parameters ( EFFECT ROUTING)

Here you can make overall settings for e ects, such as the output

destination and level of the various signals.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15

The parameters listed below in 7, 9–11 can be edited for each of the

three multi-e ects (MFX1–MFX2).

Num-
ber Parameter Value Explanation
1 Layer.Select
UPPER 1,
UPPER 2,
LOWER 1,
LOWER 2
The layer for which to make settings
2Layer.Output.
Assign
Speci es how the unprocessed sound of each layer will
be output
MFX
Output in stereo via the multi-e ect.
Chorus and reverb can also be applied
after the multi-e ect.
L+R
Output in stereo from the OUTPUT
jacks without passing through the
multi-e ect
L
Output in mono from the OUTPUT
L jack without passing through the
multi-e ect
R
Output in mono from the OUTPUT
R jack without passing through the
multi-e ect
3 MFX.Select 1–2 Multi-e ect used by the layer (choose
one of MFX 1, 2)
4Layer.Output.
Level 0–127 Level of signal sent to the destination
speci ed by Layer Output Assign
5Layer.Chorus.
Send.Level 0–127 Level of signal sent from each layer to
the chorus
6Layer.Reverb.
Send.Level 0–127 Level of signal sent from each layer to
the reverb
7 MFX.Type 0–79
Type of multi-e ect to use (choose
one of 79 types)
For details on each multi-e ect, refer
to “Multi-E ects Parameters (MFX1,
2)” (p. 48).
8 MFX.Structure 1–3 How MFX 1, 2 will be combined (p. 46)
9MFX.Output.
Level 0–127 Volume of the sound that has been
processed by the multi-e ect
10 MFX.Chorus.
Send.Level 0–127
Amount of chorus applied to the
sound that has been processed by the
multi-e ect
11 MFX.Reverb.
Send.Level 0–127
Amount of reverb applied to the
sound that has been processed by the
multi-e ect
12 Chorus.Type
Type of chorus
0 (OFF) Chorus/delay will not be used
1 (CHORUS) Chorus
2 (DELAY) Delay
3 (GM2 CHO) GM2 chorus
Num-
ber Parameter Value Explanation
13 Reverb.Type.
Type of reverb
0 (OFF) Reverb will not be used
1 (REVERB) Basic reverb
2 (SRV ROOM) Reverb that simulates the reverbera-
tion of a room
3 (SRV HALL) Reverb that simulates the reverbera-
tion of a hall
4 (SRV PLATE) Simulation of a plate echo (a reverb
device that uses a metal plate)
5 (GM2 REV) GM2 reverb
14
.Chorus.Output
Output destination of the sound that has been
processed by the chorus
MAIN Output in stereo to the OUTPUT jacks
REV Output in mono to reverb
M+R Output in stereo to the OUTPUT jacks
and in mono to the reverb
Chorus.Level 0–127 Volume of the sound that has been
processed by the chorus
15 Reverb.Level 0–127 Volume of the sound that has been
processed by the reverb