51
Overview Appendix
USB Memory
Song Player
Digital Recorder
Synthesizer
Selecting Sounds Perform. Functions Editing/Eects Other Settings Rec/Play/Edit Eects Rhythm Pattern
05: SUPER FILTER
This is a lter with an extremely sharp slope. The cuto frequency can be varied
cyclically.
L in
R in
L out
R out

Super Filter

Super Filter

Parameter Value Explanation
Filter.Type
Filter type
Frequency range that will pass through each lter
LPF Frequencies below the cuto
BPF Frequencies in the region of the
cuto
HPF Frequencies above the cuto
NOTCH Frequencies other than the
region of the cuto
Filter.Slope
Amount of attenuation per octave
-12 dB Gentle
-24 dB Steep
-36 dB Extremely steep
Filter.Cuto.# 0–127
Cuto frequency of the lter
Increasing this value will raise the
cuto frequency.
Filter..
Resonance.# 0–127
Filter resonance level
Increasing this value will
emphasize the region near the
cuto frequency.
Filter.Gain 0–+12 dB Amount of boost for the lter
output
Modulation.Sw OFF, ON On/o switch for cyclic change
Modulation.Wave
How the cuto frequency will be modulated
TRI Triangle wave
SQR Square wave
SIN Sine wave
SAW1 Sawtooth wave (upward)
SAW2 Sawtooth wave (downward)
SAW1 SAW2
Rate.# 0.05–10.00 Hz, note Rate of modulation
Depth 0–127 Depth of modulation
Attack.# 0–127
Speed at which the cuto
frequency will change
This is eective if Modulation
Wave is SQR, SAW1, or SAW2.
Level 0–127 Output level
06: STEP FILTER
This is a lter whose cuto frequency can be modulated in steps. You can specify the
pattern by which the cuto frequency will change.
L in
R in
L out
R out

Step Filter

Step Filter

Parameter Value Explanation
Step.01-16 0–127 Cuto frequency at each step
Rate.# 0.05–10.00 Hz, note Rate of modulation
Attack.# 0–127
Speed at which the cuto
frequency changes between
steps
Filter.Type
Filter type
Frequency range that will pass through each lter
LPF Frequencies below the cuto
BPF Frequencies in the region of the
cuto
HPF Frequencies above the cuto
NOTCH Frequencies other than the
region of the cuto
Filter.Slope
Amount of attenuation per octave
-12 dB Gentle
-24 dB Steep
-36 dB Extremely steep
Filter..
Resonance.# 0–127
Filter resonance level
Increasing this value will
emphasize the region near the
cuto frequency.
Filter.Gain 0–+12 dB Amount of boost for the lter
output
Level 0–127 Output level
MEMO
You can use multi-eect control to make the step sequence play again from
the beginning (p. 46).
07: ENHANCER
Controls the overtone structure of the high frequencies, adding sparkle and tightness
to the sound.
L in
R in
L out
R out
Mix
Mix

Enhancer

Enhancer 2-Band

EQ
2-Band
EQ
Parameter Value Explanation
Sens.# 0–127 Sensitivity of the enhancer
Mix.# 0–127 Level of the overtones generated
by the enhancer
Low.Gain -15–+15 dB Gain of the low range
High.Gain -15–+15 dB Gain of the high range
Level 0–127 Output Level