89
Overview Appendix
USB Memory
Song Player
Digital Recorder
Synthesizer
Selecting Sounds Perform. Functions Editing/Eects Other Settings Rec/Play/Edit Eects Rhythm Pattern
Adjusting the Pan, Reverb, and EQ ( TRACK SETTING)
In the TRACK SETTING screen you can adjust the pan and reverb of
tracks 1–8 and the Rhythm Pattern.

1. In.the.RECORDER.screen,.press.the.[4].(TRK.SET).button.

The TRACK SETTING screen will appear.
Track.Number Explanation
RRhythm Pattern
1–8 Track 1–8
Function.Buttons Explanation
[1].(EQ.SET). Accesses the equalizer setting screen (EQ SETTING).
[2].(ST.LINK). Enables Stereo Link.

2. Use.the.cursor.buttons.to.select.to.the.parameter.that.you.

want.to.set.

3. Use.the.VALUE.dial.or.the.[DEC].[INC].buttons.to.set.the.

value.
Parameter Value Explanation
.Level 0–127 Volume of each track
.Pan L64–
0–63R Pan (left/right position) of each track
Reverb 0–127 Level of signal sent from each track to reverb
.EQ OFF,
ON
Equalizer (EQ) switch for each track
Press the [1] (EQ SET) button to open the
equalizer setting screen for each track.
.V-Track 1–8
V-Track number
The status of the V-track is shown in the screen
(n indicates that data exists).
* The.Rhythm.Pattern.does.not.have.
V-tracks.

4. Press.the.[EXIT].button.to.return.to.the.RECORDER.screen.

Equalizer setting screen ( EQ SETTING)

Here you can make equalizer (EQ) settings for each track.
MEMO
To switch the track that appears in the EQ SETTING screen, hold
down the [SHIFT] button and use the cursor [ ] [ ] buttons.
Parameter Value Explanation
.On/O. OFF, ON Equalizer (EQ) switch for each
track
Low
.Low.Gain -12–+12 dB Gain of the low range
.Low.Freq 40 Hz–1.6 kHz Frequency of the low range
Mid
.Mid.Gain -12–+12 dB Gain of the middle range
.Mid.Freq 20 Hz–10 kHz Frequency of the middle range
.Mid.Q 0.5–16
Width of the middle range
Set a higher value for Q to narrow
the range to be a ected.
Parameter Value Explanation
High
.High.Gain -12–+12 dB Gain of the high range
.High.Freq 400 Hz–16 kHz Frequency of the high range

Switching V-tracks ( V-Track)

The digital recorder
provides eight tracks. Each
track consists of eight
virtual tracks (V-tracks), and
you can select one of these
V-tracks for playback and
recording.
In other words, you can use
8 x 8 = 64 tracks to record
your performance, and
choose eight of these for
playback.

1. In.the.TRACK.SETTING.screen,.change.the.value.for.“.V-Track.”

The status of the V-track is shown in the screen (n indicates that data
exists).

Controlling the Parameters of Two Tracks

Simultaneously ( Stereo Link)

In some cases you may wish to adjust the parameters of two tracks
simultaneously, such as when you’re using two tracks to record or play
back a stereo source. You can do this using the Stereo Link function.

1. In.the.TRACK.SETTING.screen,.move.the.cursor.to.the.

parameter.for.which.you.want.to.enable.(or.disable).stereo.

link.

2. Press.the.[2].(ST.LINK).button.

• The indication “=” is shown for parameters that are stereo-linked.
• When you use the VALUE dial or the [DEC] [INC] buttons to modify the
value of a track parameter that is stereo-linked, the two values will
change together.
MEMO
• The value will not change immediately when you enable stereo
link. Stereo-linked operation begins when you modify the value.
• Simply selecting stereo tracks for recording does not turn Stereo
Link on. When you select stereo tracks for recording (two REC
indications are shown) and then  nish recording, Stereo Link will
automatically be enabled for those tracks.
• The pan parameter changes as shown below when Stereo Link is
on.
L50 R50 36R46L 36R46L
]+[]-[ VALUE
46L 36R
(Default)
1
V-Track 1
V-Track 2
V-Track 3
V-Track 4
V-Track 5
V-Track 6
V-Track 7
V-Track 8
2345678