44
You can apply two multi- e ects (MFX1, MFX2), one chorus, and one
reverb to each live set. The two multi-e ects can not only be used
individually but also as a combination of multi-e ects.

Turning E ects On/O (E ect Switch)

The JUNO-Gi’s onboard e ects can be switched on/o as a whole.
Turn these OFF when you want to listen to the unprocessed sound as
you create a sound, or if you want to use an external e ects processor
instead of the built-in e ects.
NOTE
The e ect on/o settings cannot be saved.
1. Press.the.[MENU].button.
2. Use.the.VALUE.dial.or.the.cursor.buttons.to.select.
“2..E. ect.Edit,”.and.press.the.[ENTER].button.
The EFFECT ROUTING screen will appear.
3. Press.the.[6].(SWITCH).button.
The EFFECT SWITCH window will appear.
4. Press.the.[1].(MFX.1).Button–[4].(REVERB).buttons.to.turn.
each.e. ect.on/o. .
The e ect will turn on/o each time you press the button.
5. To.close.the.setting.window,.press.the.[6].(CLOSE).button.or.
the.[EXIT].button.
You will return to the EFFECT ROUTING screen.

Making E ect Settings

1. Select.the.live.set.to.which.you.want.to.apply.e.ects.
2. Press.the.[MENU].button.
3. Use.the.VALUE.dial.or.the.cursor.buttons.to.select.
“2..E. ect.Edit,”.and.press.the.[ENTER].button.
The EFFECT ROUTING screen will appear.
MEMO
You can turn each layer on/o by holding down the [SHIFT] button
and pressing the [1]–[4] buttons.
4. Press.the.[2].(MFX)–[4].(REVERB).button.to.select.the.e.ec t.
for.which.you.want.to.make.settings.
Button Explanation Page
[1].(ROUTING).
Overall e ect-related settings, such as
the output destination and level of each
signal.
p. 45
[2].(MFX). Multi-e ect settings p. 48
[3].(CHORUS). Chorus settings p. 76
[4].(REVERB). Reverb settings p. 77
5. With.the.cursor.located.at.the.top.line.of.the.screen,.use.the.
VALUE.dial.or.the.[DEC].[INC].buttons.to.select.the.desired.
e. ect.type.
(Example of MFX1 screen)
6. Use.the.cursor.buttons.to.move.the.cursor.to.the.parameter.
that.you.want.to.edit.
7. Use.the.VALUE.dial.or.the.[DEC].[INC].buttons.to.edit.the.
value.
8. When.you’ve..nished.editing,.press.the.[EXIT].button.a.
number.of.times.to.return.to.the.LIVE.SET.PLAY.screen.

Saving your e ect settings

Changes you make to the live set’s e ect settings will be lost when
you select another live set. If you want to keep the changes, press the
[WRITE] button to save your live set settings as a User Live Set (p. 35).
Applying E ects ( EFFECT EDIT )