134
Playing the JUNO-Gi from an External MIDI Device
Connection example
MIDI OUT connector
MIDI IN connector
MIDI.keyboard
JUNO-Gi
MIDI.keyboard

Setting the Receive Channel

You’ll need to match your external MIDI device’s transmit channel with
the JUNO-Gi’s receive channel.
1. Press.the.[MENU].button.
2. Use.the.VALUE.dial.or.the.cursor.button.to.select.“4..System”.
and.press.the.[ENTER].button.
3. Press.the.[3].(MIDI/SYNC).button.
4. Press.the.[1].(GENERL).button.
5. Use.the.[ ].[ ].buttons.to.select.“Main.Channel.”
6. Use.the.VALUE.dial.or.the.[DEC].[INC].buttons.to.set.the.
value.
Value 1–16
MEMO
If the [SPLIT] button is on, the Lower layer’s MIDI receive channel
can be speci ed by its own “Sub Channel” (p. 82) setting that is
independent of the Main Channel.

Setting the Program Change Receive Switch

Here’s how to turn on the receive switch for program change and bank
select messages. With the factory settings, both are turned “ON.”
1. Press.the.[MENU].button.
2. Use.the.VALUE.dial.or.the.cursor.button.to.select.“4..System”.
and.press.the.[ENTER].button.
3. Press.the.[3].(MIDI/SYNC).button.
4. Press.the.[3].(RX).button.
5. Use.the.cursor.buttons.to.select.“Receive.Program.Change”.
or.“Receive.Bank.Select.”
6. Use.the.VALUE.dial.or.the.[DEC].[INC].buttons.to.turn.each.of.
these.“ON.”
7. To.save.your.settings,.press.the.[WRITE].button.
If you decide not to save the changes you made, press the [EXIT]
button to return to the previous screen.
MEMO
• For details on these settings, refer to “[3] (RX)” (p. 82).
• For details on how to set the transmit channel of your external MIDI
device, refer to its owner’s manual.
Synchronizing with an External MIDI Device
Connection example
MIDI OUT connector
MIDI OUT connector
MIDI IN connector
MIDI IN connector
MIDI.device
JUNO-Gi
Here’s how to synchronize the JUNO-Gi’s USB Memory Song Player
with an external MIDI device.
* The.JUNO-Gi’s.Digital.Recorder.cannot.synchronize.with.an.external.
MIDI.device.
* If.the.Tempo.Link.(p..83).is.on,.the.JUNO-Gi.cannot.synchronize.to.an.
external.MIDI.device.
1. Press.the.[MENU].button.
2. Use.the.VALUE.dial.or.the.cursor.button.to.select.“4..System”.
and.press.the.[ENTER].button.
3. Press.the.[3].(MIDI/SYNC).button.
4. Press.the.[4].(SYNC).button.
5. Use.the.cursor.buttons.to.select.the.parameter.you.want.to.
edit.
6. Use.the.VALUE.dial.or.the.[DEC].[INC].buttons.to.edit.the.
value.
For details on these settings, refer to “[4] (SYNC)” (p. 83).
7. To.save.the.settings,.press.the.[WRITE].button.

Transmitting Synchronization Data

If you want an external MIDI device to synchronize to the operation of
the JUNO-Gi’s USB Memory Song Player, make the following settings.
Parameter Value
USB.Song.Sync.Mode MASTER
MIDI.Clock.Output ON

Behavior upon reception of GM System On or GS Reset

When the JUNO-Gi receives a GM System On or GS Reset message
via MIDI, it will switch to “MIDI controller mode” (p. 133). At this time,
the volume will be set to the value speci ed by “SMF Level” (p. 83).
When the JUNO-Gi receives a GM System O message, it will exit
MIDI controller mode.