100
Track Erase (Erasing Data)
This operation erases data from the speci ed region. If you use this
operation to erase data, any data located later than the erased data will
not be moved forward. In other words, this operation is comparable to
recording silence over an unwanted portion of recording tape.
* Don’t.leave.sounds.shorter.than.1.0.seconds.before.or.after.the.
erased.region..Any.remaining.sound.that.is.shorter.than.1.0.seconds.
cannot.be.played.
START END Time
1. Choose.Recorder.Menu.g.2..Track.Edit.g.Track.Erase.
(p..98)..
The TRACK ERASE screen will appear.
2. Specify.the.erasing.Source.Track,.Source.V-Track,.Start.and.
End.for.the.Erase.operation,.and.Press.the.[6].(EXEC).button.
Function.
Button Edit.Region
[1].(ALL). The edit region will be the entire track you speci ed.
[2].(AB).
The edit region will be the region between the points A
and B you speci ed.
If you want to copy/move/erase the A–B region, you must
set point A and point B beforehand (p. 90).
The display will ask “Erase OK?”
3. If.you’re.sure.you.want.to.execute,.press.the.[5].(EXEC).
button..If.you.decide.to.cancel,.press.the.[6].(CANCEL).
button.
Track Exchange (Exchanging Data)
This operation exchanges data between two tracks.

Example: Exchanging the entire contents of tracks 1 and 2

Track 1
Time
Track 1
Track 2
Track 2
1. Choose.Recorder.Menu.g.2..Track.Edit.g.Track.Exchange.(p..
98).
The TRACK EXCHANGE screen will appear.
2. Specify.the.Source.Track,.Source.V-Track,.Target.Track,.Target.
V-Track.that.you.want.to.exchange.
3. Press.the.[6].(EXEC).button.
The display will ask “Exchange OK?”
4. If.you’re.sure.you.want.to.execute,.press.the.[5].(EXEC).
button..If.you.decide.to.cancel,.press.the.[6].(CANCEL).
button.