82
Parameter Value Explanation
.Continuous.
Hold OFF, ON
Determines whether the HOLD PEDAL jack
will provide support for half-pedaling (ON),
or not (OFF). When this is set to support
use of half-pedaling techniques, you can
then connect an optional expression pedal
(DP-10, etc.), and employ pedal work to
achieve even  ner control in performances
in which piano tones are used.
[3] ( CTRL)
Parameter Value Explanation
..Sys.Ctrl.1–4.
Source
Selects the MIDI message used as the System Control.
OFF The system control knob will not be used.
CC01–31, 33–95 Controller numbers 1–95
PITCH BEND Pitch Bend
AFTERTOUCH Aftertouch
..Source.Select
SYSTEM “Sys Ctrl 1–4 Source” settings will be used
for tone control.
LIVE SET “Tone Ctrl 1–4 Source” (p. 38) settings of each
Live Set will be used for tone control.
System Menu [3] ( MIDI/SYNC) [1] ( GENERL)
Parameter Value Explanation
..Local.Switch OFF, ON
Determines whether the internal sound generator
is disconnected (OFF) from the controller section
(keyboard, pitch bend/modulation lever, knobs,
buttons, D Beam controller, pedal, and so on); or not
disconnected (ON).
Normally this is left “ON,” but if you wish to use the
JUNO-Gi’s keyboard and controllers to control only
external sound modules, set it to “OFF.”
..Device.ID 17–32
When you want to transmit or receive System
Exclusive messages, set this parameter to match the
Device ID number of the other MIDI device.
.Remote.
Keyboard.
Switch
OFF, ON
Set this parameter “ON” when you want to use an
external MIDI keyboard instead of the JUNO-Gi’s
keyboard. In this case, the MIDI transmit channel
of the external MIDI keyboard can be set to any
channel. Normally you will leave this parameter
“OFF.”
* Turn.this.“ON”.when.you.want.to.control.the.
JUNO-Gi.from.an.external.MIDI.device.when.
performing.with.the.Arpeggio.function.
..Main.Channel 1–16 MIDI receive channel for playing the JUNO-Gi from
an external MIDI device.
..Sub.Channel 1–16
MIDI receive channel on which an external MIDI
device can play the JUNO-Gi’s Lower layer when the
[SPLIT] button is on.
.USB.MIDI
.USB-MIDI.
Thru OFF, ON
If this is “ON,” incoming MIDI messages will be
re-transmitted without change from the MIDI OUT
connector.
Using the Local Switch
When you’re using the JUNO-Gi with external sequencer software, leave the
Local Switch turned o . Read the following for details.
Typically, things are hooked up so the data travels as follows: the JUNO-Gi’s
keyboard g your external sequencer software g the JUNO-Gi’s sound
generator. Normally, the JUNO-Gi’s keyboard section is internally connected to
its sound generator section; this internal connection is controlled by the Local
Switch. If you turn the Local Switch o , the JUNO-Gi’s keyboard and sound
generator sections will be independent, allowing you to use the connection
described with your external sequencer software.

Connecting the JUNO-Gi to an external sequencer

JUNO-Gi Keyboard
(External) Sequencer
Local O JUNO-Gi
Sound Generator
[2] ( TX)
Parameter Value Explanation
.Transmit.
Program.Change OFF, ON Speci es whether Program Change messages
will be transmitted (ON) or not (OFF).
.Transmit.Bank.
Select OFF, ON Speci es whether Bank Select messages will
be transmitted (ON) or not (OFF).
.Transmit.Active.
Sensing OFF, ON Speci es whether Active Sensing messages
will be transmitted (ON) or not (OFF).
.Transmit.Edit.
Data OFF, ON
Specify whether changes you make in the
settings of a patch, performance will be
transmitted as system exclusive messages
(ON), or will not be transmitted (OFF).
.Soft.Through OFF, ON
Thru function re-transmits all messages
received at the MIDI IN connector to the MIDI
OUT connector without modifying them in
any way.
[3] ( RX)
Parameter Value Explanation
.Receive.Program.
Change OFF, ON Speci es whether Program Change messages
will be received (ON) or not (OFF).
.Receive.Bank.
Select OFF, ON Speci es whether Bank Select messages will
be received (ON) or not (OFF).
.Receive.Exclusive OFF, ON Speci es whether System Exclusive messages
will be received (ON) or not (OFF).
.Receive.GM.
System.On OFF, ON Speci es whether General MIDI System On
messages will be received (ON) or not (OFF).
.Receive.GM2.
System.On OFF, ON Speci es whether General MIDI 2 System On
messages will be received (ON) or not (OFF).
.Receive.GS.Reset OFF, ON Speci es whether GS Reset messages will be
received (ON) or not (OFF).