111
Overview Appendix
USB Memory
Song Player
Digital Recorder
Synthesizer
Selecting Sounds Perform. Functions Editing/Eects Other Settings Rec/Play/Edit Eects Rhythm Pattern
Parameter Value Explanation
Mic.Type
This setting selects the simulated microphone type.
DYN57
This is the sound of the SHURE SM-57, a
general-use dynamic microphone used for
instruments and vocals. Optimal for use in
miking guitar amps.
DYN421 This is the sound of the SENNHEISER MD-421, a
dynamic microphone with extended low end.
CND451
This is the sound of the AKG C451, a small-
diaphragm condenser microphone for use with
instruments.
CND87
This is the sound of the NEUMANN U87, a
large-diaphragm condenser microphone with
at response.
FLAT Simulates a microphone with perfectly at
response.
Mic.Distance
Simulates the distance between the microphone and speaker.
OFF MIC This setting points the microphone away from
the speaker.
ON MIC Provides conditions whereby the microphone is
directed more towards the speaker.
Mic.Position
This simulates the microphone position.
CENTER Simulates the condition that the microphone is
set in the middle of the speaker cone.
1–10
Simulates the condition that the microphone
is moved away from the center of the speaker
cone.
Mic.Level 0–100 Adjusts the volume of the microphone.
EQUALIZER
Low Gain Lo-Mid Gain
Lo-Mid Freq Hi-Mid Freq
Frequency
Hi-Mid Gain High Gain
Parameter Value Explanation
On/O OFF, ON Turns the EQ OFF/ON.
Low.Cut FLAT, 55–800
(Hz)
This sets the frequency at which the low cut
lter begins to take eect. When “FLAT” is
selected, the low cut lter will have no eect.
Low.Gain -20–+20 (dB) Adjusts the low frequency range tone.
Lo-Mid.Freq 20.0–10.0k
(Hz)
Species the center of the frequency range that
will be adjusted by the Lo-Mid Gain.
Lo-Mid.Q 0.5–16
Adjusts the width of the area aected by the EQ
centered at the “Lo-Mid Freq.” Higher values will
narrow the area.
Lo-Mid.Gain -20–+20 (dB) Adjusts the low-middle frequency range tone.
Hi-Mid.Freq 20.0–10.0k
(Hz)
Species the center of the frequency range that
will be adjusted by the Hi-Mid Gain.
Hi-Mid.Q 0.5–16
Adjusts the width of the area aected by the EQ
centered at the “Hi-Mid Freq.” Higher values will
narrow the area.
Hi-Mid.Gain -20–+20 (dB) Adjusts the high-middle frequency range tone.
High.Gain -20–+20 (dB) Adjusts the high frequency range tone.
High.Cut 700–11.0k,
FLAT (Hz)
This sets the frequency at which the high cut
lter begins to take eect. When “FLAT” is
selected, the high cut lter will have no eect.
Level -20–+20 (dB) Adjusts the volume before the equalizer.
NOISE SUPPRESSOR
Parameter Value Explanation
On/O OFF, ON Turns the NOISE SUPPRESSOR OFF/ON.
Threshold 0–100
This adjusts the eect in response to the level
of noise. A value of 0 switches o the noise
suppressor.
Setting this higher than necessary may cause
no sound to be produced when the guitar is
played at low volume.
Release 0–100
Adjusts the time from when the noise
suppressor begins to function until the noise
level reaches “0.”