5Press the memory module into the slot with care until you hear a 'click'.
Caution
Do not press the memory module strongly or the module may be damaged. If the module does not seem to fit into the slot properly, carefully try the previous procedure again.
6Replace the control board cover.
7Reconnect the power cord and printer cable, and turn the machine on.
Note
To release the memory module, pull the two tabs on the sides of the slot outwards, then the module springs out.
Activating the added memory in the PS printer properties
After installing the memory module, you need to select it in the printer properties of the PostScript printer driver in order to use it.
1Make sure that the PostScript printer driver is installed on your computer. For details about installing the PS printer driver, see Software section.
2Click the Windows Start menu.
3For Windows 2000, select Settings and then Printers. For Windows XP/2003, select Printers and Faxes.
For Windows Vista, select Control Panel ➞ Hardware and Sound ➞ Printers.
4Select the Samsung
5Click the right mouse button on the printer icon and select Properties.
6Select Device Settings.
7Select the amount of memory you installed from Printer Memory in the Installable Options section.
8Click OK.
9.2 <Installing accessories>
