MACHINE'S BASIC SETTINGS
After installation is complete, you may want to set the machine's default settings. Refer to the next section if you would like to set or change values.
Altitude adjustment
The print quality is affected by atmospheric pressure, which is determined by the height of the machine above sea level. The following information will guide you on how to set your machine to the best print quality or best quality of print.
Before you set the altitude value, find the altitude where you are using the machine.
Key sound, and alarm sound
1.Press Menu and then OK.
2.Press the left/right arrow until System Setup appears and press OK.
3.Press the left/right arrow until Sound/Volume appears and press OK.
4.Press the left/right arrow until the sound option you want appears and press OK.
5.Press the left/right arrow until the desired status and press OK.
6.Press Stop/Clear to return to ready mode.
Using the save modes
Power Save mode
Power Save mode allows your machine to reduce power consumption when it is not in actual use. You can turn this mode on and select a length of time for which the machine waits after a job is printed before it switches to a reduced power state.
0
1 Normal
2 High 1
3 High 2
4 High 3
1.Press Menu and then OK.
2.Press the left/right arrow until System Setup appears and press OK.
3.Press OK when Machine Setup appears.
4.Press the left/right arrow until Power Save appears and press OK.
5.Press the left/right arrow until the time setting you want appears and press OK.
6.Press Stop/Clear to return to ready mode.
Auto continue
1.Ensure that you have installed the printer driver with the provided Printer Software CD.
2.
You can also click Smart Panel on the status bar in Mac OS X.
3.Click Printer Setting.
4.Click Setting > Altitude Adjustment. Select the appropriate value from the dropdown list, and then click Apply.
If your machine is connected to a network, SyncThru Web Service screen appears automatically. Click Machine Settings > Setup (or Machine Setup) > Adj.. Select the appropriate altitude value, and then click Apply.
Changing the display language
To change the language that appears on the control panel, follow these steps:
1.Press Menu and then OK.
2.Press the left/right arrow until System Setup appears and press OK.
3.Press OK when Machine Setup appears.
4.Press the left/right arrow until Language appears and press OK.
5.Press the left/right arrow until the language you want appears and press OK.
6.Press Stop/Clear to return to ready mode.
Setting sounds
You can control the following sounds:
•Key Sound: Turns the key sound on or off. With this option set to On, a tone sounds each time a key is pressed.
•Alarm Sound: Turns the alarm sound on or off. With this option set to On, an alarm tone sounds when an error occurs.
This is the option to set the machine to continue printing or not, in case the paper size you have set and the paper within the tray mismatches.
1.Press Menu and then OK.
2.Press the left/right arrow until System Setup appears and press OK.
3.Press OK when Machine Setup appears.
4.Press the left/right arrow until Auto Continue appears and press OK.
5.Press the left/right arrow until the binding option you want appears.
•On: Automatically prints after set time passes, when the paper size mismatches the tray paper size.
•Off: Waits until you press Black Start or Color Start on the control panel, when the paper size mismatches the tray paper size.
6.Press OK to save your selection.
7.Press Stop/Clear to return to ready mode.
Getting started_ 28
