MESSAGE

MEANING

SUGGESTED

SOLUTIONS

 

 

 

 

 

Paper Jam 2

Paper has jammed In

Clear the jam. (See "In

Check Inside

the fuser area or

the paper exit area" on

 

around the toner

page 55.)

 

cartridge

 

Refilled Toner

The toner cartridge

The print quality may get

T

you have installed is

poor if the refilled toner

 

not genuine or refilled.

cartridge is installed,

 

The arrow indicates

since its characteristics

 

which color toner

may significantly differ

 

cartridge.

from the genuine. We

 

 

recommend Samsung-

 

 

genuine color toner

 

 

cartridge.

Replace Toner

This message

Replace the toner

T

appears between

cartridge with a new one.

 

Toner Empty and

(See "Replacing the

 

Toner Low status.

toner cartridge" on

 

 

page 50.)

Replace

The life of the part

Replace the part with a

[xxx]

expires totally.

new one. Call for

 

 

service.

Replace

The life of the part

See "Checking

[xxx] Soon

expires soon.

replaceables" on

 

 

page 53 and call for

 

 

service.

Replace/Install

The life span of the

Replace the waste toner

Toner Waste Bin

waste toner tank has

bank with a new one.

 

expired and the printer

(See "Replacing the

 

will stop printing until

waste toner

 

a new waste toner

container" on page 52.)

 

tank is placed into the

 

 

machine.

 

Scan Unit Open

The scan unit is not

Close the scan unit it

 

securely latched.

locks into place.

Scanner locked

The scanner module

Turn the power switch

 

is locked

off and on. If the problem

 

 

persists, call for service.

Send Error

There is a problem in

Configure the

(AUTH)

SMTP authentication.

authentication setting.

Send Error

There is a problem in

Configure the DNS

(DNS)

DNS.

setting.

 

 

 

Send Error

There is a problem in

Configure the POP3

(POP3)

POP3.

setting.

Send Error

There is a problem in

Change to the available

(SMTP)

SMTP.

server.

Send Error

There is a problem on

Configure your network

(Wrong Config)

the network interface

interface card correctly.

 

card.

 

[Stop Pressed]

Stop/Clear has been

Try again.

 

pressed during an

 

 

operation.

 

 

 

 

MESSAGE

 

 

MEANING

SUGGESTED

 

 

SOLUTIONS

 

 

 

 

 

 

 

 

 

Toner Empty

The toner cartridge

You can select the

T

has run out. The

option among Stop,

 

machine stops

Continue or Black Only

 

printing.

with the left/right arrow.

 

Press OK to toggle

If you select Stop by

 

the message to Stop

pressing OK on the

 

or Continue or Black

control panel, the

 

Only.

machine stops printing.

 

 

 

W Stop X

If you select Continue,

 

 

 

 

the machine keeps

 

 

 

If the black

printing, but the quality

 

 

 

 

 

 

toner cartridge

cannot be guaranteed.

 

 

 

is empty,

If you select Black Only,

 

 

 

 

 

 

Black Only

the machine prints the

 

 

 

message does

data in black. In this

 

 

 

not appear.

case, the mono printing

 

 

 

 

feature is preset in the

 

 

 

 

printer properties.

 

 

 

 

When you copy, the

 

 

 

 

Black Start button will

 

 

 

 

be activated only with

 

 

 

 

this condition.

 

 

 

 

If you do not select any,

 

 

 

 

the machine will work as

 

 

 

 

Stop is selected.

 

 

 

 

Replace the toner

 

 

 

 

cartridge with a new one.

 

 

 

 

(See "Replacing the

 

 

 

 

toner cartridge" on

 

 

 

 

page 50.)

Toner Exhausted

The lifespan of the

This message appears

T

toner cartridge which

when the toner is

 

the arrow indicates is

completely empty, and

 

reached.

your machine stops

 

 

 

 

printing. Replace the

 

 

 

 

corresponding toner

 

 

 

 

cartridge with a

 

 

 

 

Samsung-genuine

 

 

 

 

cartridge. (See

 

 

 

 

"Replacing the toner

 

 

 

 

cartridge" on page 50.)

Toner Low

The corresponding

Take out the toner

T

toner cartridge is

cartridge and thoroughly

almost empty.

shake it. By doing this,

 

 

 

 

 

you can temporarily

 

 

 

 

reestablish printing

 

 

 

 

operations.

Transfer Belt

A problem has

Turn the power switch

Error

occurred in the

off and on. If the problem

 

transfer belt in the

persists, call for service.

 

machine.

 

Tray

There is no paper in

Load paper in the tray.

Paper Empty

the tray.

 

Tray

The paper size

Load the correct paper in

Paper Mismatch

specified in the printer

the tray.

 

properties does not

 

 

match the paper you

 

 

are loading.

 

 

 

 

 

 

Troubleshooting_ 58

Page 154
Image 154
Samsung CLX-3170FN, CLX-3175FW, CLX-3175FN, CLX-3175N manual Expires soon Replaceables on 53 and call for Service