6.Slide the tray 1 back into the machine.
7.After loading paper, set the paper type and size for the tray. See "Setting the paper size and type" on page 40.
• Due to insufficient paper in the tray, the paper length guide can be pushed to inside, load enough paper.
•If you experience problems with paper feed, load a paper into the tray one by one.
•You can load previously printed paper. The printed side should be facing up with an uncurled edge at the front. If you experience problems with paper feed, turn the paper around. Note that print quality is not guaranteed.
The tray is preset to Letter or A4 size, depending on your country. To change the size to A4 or Letter, you must adjust the lever and paper width guide properly.
1Pull the tray out of the machine. Open the paper cover and remove paper from the tray if necessary.
2If you want to change the size to Letter, hold the lever at the back of the tray, and rotate the lever clockwise.
3 Squeeze the paper width guide and slide it to the edge of the lever.
If you want to change the size to A4, first move the paper width guide to left and rotate the lever counterclockwise. If you force the lever, it could damage the tray.
