REPLACING THE IMAGING UNIT
When the life span of the imaging unit has expired, the Smart Panel program window appears on the computer, indicating the imaging unit needs to be replaced. Otherwise your machine stops printing.
1.Turn the machine off, then wait a few minutes for the machine to cool.
2.Using the handle, completely open the front cover.
3.Grasp the handles on the toner cartridge and pull to remove four cartridges from the machine.
4.Pull the waste toner container out of the machine using its handle.
5.Pull the imaging unit out of the machine using the groove on the front of the imaging unit.
6.Take a new imaging unit out of its package. Remove the protective devices on both sides of the imaging unit and the paper protecting the surface of the imaging unit.
• Don’t use sharp objects, such as a knife or scissors, to open the imaging unit package. You could damage the surface of the imaging unit.
•Be careful not to scratch the surface of the imaging unit.
•To prevent damage, do not expose the imaging unit to light for more than a few minutes. Cover it with a piece of paper to protect it if necessary.
7.Holding the groove on the front of the imaging unit, push imaging unit in to the machine.
