1.Open the scan unit.
2.Open the inner cover.
3.Carefully take the jammed paper out of the machine.
Do not touch the fuser inside the inner cover. It is hot and could cause burns! The fuser's operating temperature is 180°C (356°F). Take care when removing paper from the machine.
4.Close the inner cover.
5.Lowering down the scan unit gently and slowly until it is completely closed. Make sure that it is securely latched.
Be careful not to pinch your fingers!
If the scan unit is not completely closed, the machine will not operate.
In the paper exit area
1.Open and close the front cover. The jammed paper is automatically ejected from the machine.
2.Gently pull the paper out of the output tray.
If you do not see the jammed paper or if there is any resistance when you pull, stop and go to the next step.
3.Open the rear cover.
4.If you see the jammed paper, pull it straight up. Skip to step 8.
If you still do not see the paper, go to the next step.
