Samsung DVD-R119/EUR manual Plug & Auto Setup, Select Country using the …† œ √ buttons to

Plug & Auto Setup

Your DVD RECORDER will automatically set itself up when it is plugged in for the first time. TV stations and clock will be stored in memory. The process takes a few minutes. Your DVD RECORDER will then be ready for use.

1	Connect the RF cable as indicated on page 17.
	(Connecting Your DVD RECORDER to the TV
	Using the RF Cable and scart cable.)
2	Plug the DVD RECORDER into the mains.
	“Auto” in the front panel display flickers.

System Setup

3 Press a number button to select the language.

Select “Country” using the…† œ √ buttons to
5 select your country.
	Country Selection
			NL	S	PL
		A
		B	I	CH	CZ
		DK	N	TR	Others
		FIN	P	GR
		D	E	HU

• Refer to following abbreviation table when selecting “Country”.

A(Austria)	NL(Netherlands)	S(Sweden)	PL(Poland)
B(Belgium)	I(Italy)	CH(Swiss)	CZ (Czech)
DK(Denmark)	N(Norway)	TR(Turkey)	Others
FIN(Finland)	P(Portugal)	GR(Greece)
D(Deutschland)	E(Spain)	HU(Hungary)

•The DVD RECORDER searches for the stations according to a preset preference list corresponding to the country that you have selected.

6 Press the OK button. Auto channel scan will be started.

Press 1 for English Touche 2 pour Français

Drücken Sie 3 Für Deutsch Pulse 4 para Español

Premere 5 per Italiano Druk op 6 voor Nederlands

Channel Scan

Scanning...

10%

4 Press the OK button to start the auto setup.

Auto setup will be started.

Check antenna and TV cable connection.

Yes No

•The number of stations automatically stored by the DVD RECORDER depends on the number of stations that it has found.

7 After auto channel scan is completed, auto clock setting will be started automatically in 10 seconds. If you want to start auto clock setting immediately, press OK button. If you do not want to do auto clock setting, press CANCEL or MENU button.

Auto channel scan completed successfully.

Press the [OK] button to auto clock set.

Yes No

24 - English