Samsung DVD-R119/EUR manual Case 3 Component Video output jacks

Case 3 : Component Video output jacks

	1.	Connect Component video cables(not supplied)
		between the COMPONENT OUT(Y,PB,PR) jacks on
		DVD RECORDER and COMPONENT IN(Y,PB,PR)
		jacks on your TV.
		• You will enjoy high quality and accurate colour
		reproduction images.
	2.	Connect audio cables (white and red) between the
Up
		AUDIO OUT jacks on the DVD RECORDER and
Setting		AUDIO IN jacks on TV (or AV amplifier).
		(See pages 20~22).
Connecting &	3.	After connecting, refer to the pages 35~37.

COMPONENT	red	blue	green
	green
Y

blue

Pb

red

Pr

Other type of connecting the Audio output cable

There are several ways to output audio signal not using scart cables. Select the audio connection that best suits you below.

•Case 1 : Connecting to your TV

•Case 2 : Connecting to a stereo amplifier with AV output jacks

•Case 3 : Connecting to an AV amplifier with a digital output jack

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

	■ Make sure that the colour coded
	connections match. The Y, PB, PR
NOTE
	component output jacks of your DVD
	RECORDER must be connected to the
	exact corresponding component input
	jacks on your TV.

■Progressive setting is only available when the Video Out is set to Component. (See pages 35~37)

20 - English