Samsung DVD-R119/EUR manual Connecting, Additional Connections

Connecting the	Additional Connections
DVD RECORDER

You can connect your DVD RECORDER to the television using the SCART cable if the appropriate input is available on the television.

1.Connect the RF cable as shown.

2.Connect one end of the SCART cable to the AV1 socket on the rear of the DVD RECORDER.

3.Plug the other end into the appropriate connector on the television.

4.Plug in the DVD RECORDER and TV.

5.Turn on the DVD RECORDER and TV.

6.Press the INPUT button on your TV remote control until the Video signal from the DVD RECORDER appears on the TV screen.

To RF IN

You can connect your DVD RECORDER to a satellite or digital tuner.

external device (VCR/Satellite receiver)

Connecting & Setting Up

To TV

RF Cable

To ANT INPUT

■ The RF cable connection of this product sends only signals of TV. You must connect

NOTE	SCART cable or Audio/Video cables to watch
	a DVD from your DVD RECORDER.

■TV mode Press the TV/DVD button on remote control, then “TV” appear on Front LED display (or turn off DVD RECORDER).

Then you can watch programmes received through RF cable.

- DVD mode

1.Connect the AV2 connector of DVD RECORDER and VCR/Satellite receiver or digital tuner using a SCART cable.

2.Connect the AV1 connector to the SCART AV connector on TV.

3.Turn on the DVD RECORDER, VCR/Satellite receiver or digital tuner and TV.

4.Set Input mode on AV2.

- TV mode

1.Press the TV/DVD button on remote control,then “TV” appear on Front LED display. (or turn off

DVD RECORDER.)

2.You can watch programmes from a satellite or digital tuner connected to this DVD RECORDER, even when the DVD RECORDER is turned off.

English - 17