29
Basic Functions

3D Sound Function

The simulated surround effect (SPATIALIZER N-2-2) depends on the disc contents. If you connect
the DVD-R2000 to your stereo system, you can enhance sound quality and produce a greater
surround effect. This feature is useful when you are using the DVD-R2000 with a two channel
stereo through the analog outputs. (Discs which are recorded with LPCM or DTS will not work.
When the DIGITAL OUTPUT is set to BITSTREAM in the SETUP MENU, the 3D Sound function
will not work.)

Using the 3D Sound Function (Except MP3)

1 During playback, press the 3D/+100 button on the remote. The
3D SOUND mark will be displayed on screen.
(Be sure the DIGITAL OUTPUT is set to PCM. See page 38.)
2 Press the LEFT/RIGHT button to turn the 3D Sound feature on or
off.
3 To make the screen disappear, press the 3D/+100 button
again.
NOTE
3D Sound is possible only on discs recorded using DOLBY
SURROUND or DOLBY DIGITAL.
However, some of these discs do not contain rear channel sound signals.
Depending on the disc, the 3D Sound function may not work.