To Watch TV & VCR Playback (or Other Equipment)

Watching TV

First check that the Tuner Mode is matched with the ANT input. (TV:AIR or CATV:CABLE) (See page 34)

Then, turn on the power of the DVD-R2000 and your TV.

Select a TV channel you desire to watch with the NUMBER but-

1 tons on the remote control.

- If you select 125CH; Press .

You can also select a TV channel with the CHANNEL

2 UP/DOWN buttons. For this operation, you need to make settings as below.

- Select the TV(AIR) Signal or CATV Signal in the Tuner Mode of General Options, then use the Auto Scan to select channels automatically. Then, use Add/Delete Channel Mode to delete unnecessary channels. (see page 33)

Viewing VCR Playback

First check that the external input 1 or 2 on the back of DVD-R2000 is connected to a VCR. (L3 at the front of DVD-R2000) Then, turn on the power of the DVD-R2000, TV and VCR.

While in stop mode, select L1, L2 or L3 with the RETURN/INPUT

1 or CHANNEL UP/DOWN buttons on the remote.

(If the VCR is connected to terminal 1 of DVD-R2000, select L1 with Channel UP/DOWN button).

2 Press the PLAY button of VCR.

30

Page 30
Image 30
Samsung DVD-R2000 manual To Watch TV & VCR Playback or Other Equipment, Watching TV, Viewing VCR Playback