ENGLISH

Preparing

To use the Battery Pack

How long will the battery last for recording?

Depends on how often you are likely to use the zoom feature during recording.

Recharging the Battery Pack

1. Attach the battery pack to the camcorder.

1

2.

Connect the AC Power Adapter to the AC

2

 

cord and connect the AC cord to a wall

 

 

 

socket.

 

3.

Connect the DC cable to the DC jack of

 

 

the camcorder.

 

4.

Turn off the camcorder power, and the

4

 

recharging indicator will start blinking and

 

 

begin recharging.

OFF

 

- Blinking once a second : Indicates

 

less than 50% has been charged.

 

-Blinking twice a second : Indicates 50% ~ 75% has been recharged.

-Blinking three times a second : Indicates 75% ~ 100% has been recharged.

-Blinking stops and stays on : Recharging has been completed.

-On for a second and off for a second: Indicates there is an error. Reset the battery pack and DC cable.

5.If recharging is completed, separate the camcorder, AC power adapter, and battery pack.

Even if the power is turned off, battery will be discharged.

Note: Battery pack may be charged a little at the time of purchase.

ESPAÑOL

Configuración de la videocámara

Para el uso de la batería

¿Qué duración tendrá la batería para filmar?

La frecuencia con que se usan las lentes de zoom. Prepare tantas baterías como sea posible.

Recarga de la batería

1. Conecte la batería a la videocámara.

3

2.

Conecte el adaptador de corriente AC a un

 

cable AC y conecte el cable a una toma de

 

 

 

 

pared.

 

3.

Conecte el cable DC a un jack DC de la

 

 

videocámara.

 

4.

Apague la videocámara y el indicador de

 

 

recarga comenzará a parpadear y

 

 

comenzará la carga.

 

 

- Parpadeo una vez por segundo: Indica

que se ha cargado menos del 50%. - Parpadeo dos veces por segundo:

Indica que se ha cargado el 50% ~ 75%.

-Parpadeo tres veces por segundo: Indica que se ha cargado el 75% ~ 100%.

-Se detiene el parpadeo y la luz es contínua: Se ha completado la recarga.

-Encendido y apagado cada segundo: Indica algún error. Vuelva a colocar la batería y el cable DC.

5.Si se ha completado la recarga, separe la videocámara, el adaptador de corriente y la batería.

Incluso si se ha apagado la cámara, se descargará la batería.

Nota: La batería puede estar parcialmente cargada en el momento de la compra.

19

Page 19
Image 19
Samsung L630, L650 manual To use the Battery Pack, Para el uso de la batería