6Hold the PS DIMM so that the notch and the connection point are aligned with the slot as shown, and insert it all the way into the lower slot.

7Close the control board cover.

8Tighten the two screws.

9Reconnect the power cord and printer cable, and turn the printer on.

NOTES:

D

• If you are using the printer as a PostScript device, you need to

change the memory value in the printer properties as you have

installed.

 

For PS printing on a Windows system, refer to Appendix A, "Using Windows PostScript Driver."

INSTALLING PRINTER OPTIONS D.5

Page 176
Image 176
Samsung ML-2250, ML-2252W, ML-2251N manual Installing Printer Options D.5