Using the Status Monitor

If an error occurs while printing, the Status Monitor window appears, showing the error.

NOTEs:

The Status Monitor program can only be used if you connect the printer to your computer with the USB cable, or on the network.

You can use the Status Monitor in Windows 98/Me/NT 4.0/2000/ XP.

Installing Status Monitor

1Insert the supplied CD-ROM into your CD-ROM drive.

The CD-ROM should automatically run and an maintenance window appears.

If the maintenance window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with the letter of your drive and click OK.

NOTE: If your machine is not connected to the computer, the following window will appear.

After connecting the machine, click Next.

If you want to skip the connection status, click Next, and No to the following screen.

2Click Custom.

If you have been installed the printer driver before, click Repair.

3Click Status Monitor and then click Next.

4When the installation is completed, click Finish.

4.26 PRINTING TASKS

Page 101
Image 101
Samsung ML-2250, ML-2252W, ML-2251N manual Using the Status Monitor, Installing Status Monitor